Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
Can't startup on NUC
« previous
next »
Print
Pages: [
1
]
Author
Topic: Can't startup on NUC (Read 1405 times)
towa
Newbie
Posts: 2
Karma: 0
Can't startup on NUC
«
on:
December 20, 2022, 07:28:20 pm »
Hello together,
I bought an ASRock NUC BOX-J6412 (because of it's two network interfaces) and I qould run OPNsense on it.
But I can't.
My startup from USB device ends very fast with:
atrtc0: <AT realtime clock> port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
after that, nothing happens.
Can someone help?
Many thanks
ToWa
Logged
chemlud
Hero Member
Posts: 2487
Karma: 112
Re: Can't startup on NUC
«
Reply #1 on:
December 20, 2022, 08:32:58 pm »
Have you tried booting any other OS on the box, e.g. NomadBSD
https://nomadbsd.org/
? Just an idea....
Logged
kind regards
chemlud
____
"The price of reliability is the pursuit of the utmost simplicity."
C.A.R. Hoare
felix eichhorns premium katzenfutter mit der extraportion energie
A router is not a switch - A router is not a switch - A router is not a switch - A rou....
CobraPL
Newbie
Posts: 7
Karma: 0
Re: Can't startup on NUC
«
Reply #2 on:
December 22, 2022, 04:35:53 pm »
Except trying other FreeBSD-based systems like @chemlud mentioned, I suggest (running Windows if installer needs one and) updating all BIOS/UEFI/MEI/firmware etc. everything you can.
Disable secure boot. Leave UEFI, but disable secure boot!
In case you manage to install, I suggest trying Realtek drivers available in Plugins section.
Please do speedtest on 1Gbps net and share the results, since on WYSE 5070 (older celeron) I have 600Mbps max, while on Mikrotik I have almost 1Gbps.
«
Last Edit: December 22, 2022, 04:39:28 pm by CobraPL
»
Logged
towa
Newbie
Posts: 2
Karma: 0
Re: Can't startup on NUC
«
Reply #3 on:
December 22, 2022, 08:42:41 pm »
Many thanks for help.
I try to run nomadbsd (ZFS) and get the same error.
After that I run Windows (10) setup from stick which works very well.
BIOS is up to date
SecureBoot is disabled
TPM is disabled
Audio Controller disabled
COM Port disabled
But I think it's working now... I loaded BIOS Defaults so TPM, Audio and COM will be enabled and I can boot to NomadBSD and OPNsense.
@CobraPL
I doesn't need very high performance it have to be a stable and running system for special use.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
Can't startup on NUC