Very Minor Gui Issue

[ProximusAl]

Just a tiny little thing my OCD doesn't like seeing.

In the interfaces section of the Dashboard, there is a mismatch in the descriptor of the speed.

1000baseT and 2500Base-T.

From my limited googling, it seems like the latter is correct, so ideally both should read:
1000Base-T and 2500Base-T

As I say, not an issue, but should be a reasonably simple fix to implement.

[franco]

Might be a driver issue? We only process the following from ifconfig:

% ifconfig | grep media:
   media: Ethernet autoselect (1000baseT <full-duplex>)
   media: Ethernet autoselect (1000baseT <full-duplex>)
   media: Ethernet autoselect
   media: Ethernet autoselect
   media: Ethernet autoselect
   media: Ethernet autoselect
   media: Ethernet autoselect
   media: Ethernet autoselect (1000baseT <full-duplex>)
   media: Ethernet autoselect (1000baseT <full-duplex>)
   media: Ethernet autoselect (autoselect <full-duplex>)


Cheers,
Franco

[ProximusAl]

Looks like you are correct Franco:

# ifconfig | grep media:
        media: Ethernet autoselect (2500Base-T <full-duplex>)
        media: Ethernet autoselect (1000baseT <full-duplex>)
        media: Ethernet autoselect (1000baseT <full-duplex>)
        media: Ethernet autoselect

[franco]

FreeBSD source file is https://github.com/opnsense/src/blob/stable/22.7/sys/net/if_media.h#L432

Looks like a historic artefact, but unsure if anyone is crazy enough to edit this for consistency.


Cheers,
Franco

[ProximusAl]

My OCD is not *that* bad to attempt that

[franco]

I think we might even use these strings in "Speed and duplex" setting so ifconfig is accepting them as well and nobody will ever be able to touch those...


Cheers,
Franco