Wireguard S2S Routing from single Concentrator

Started by drdownload, July 08, 2022, 09:30:57 AM

Previous topic - Next topic
Hi I have the following problem:

I have multiple sites (no overlapping ip ranges)
All of them are connected to a central wireguard server.
Routing from the central network to all connected works. Site A to all others and vice versa. What doesn't work is to connect from Site B to Site C.

If I add routes on Site B for Site C to use the connection to Site A it doesn't work.

Maybe the packets are blocked? To you see them incoming on the central site?
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

No, they are in live log on the WG interface and not blocked. I tried an outbound nat but also to no avail, I don't get where they are blocked/not forwarded

And you also have Network A routed at Site B and C?
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/