OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 22.1 Legacy Series »
  • mDNS Repeater not working after multi-WAN
« previous next »
  • Print
Pages: [1]

Author Topic: mDNS Repeater not working after multi-WAN  (Read 6934 times)

OPNsense4ever

  • Newbie
  • *
  • Posts: 29
  • Karma: 2
    • View Profile
mDNS Repeater not working after multi-WAN
« on: May 11, 2022, 01:09:43 am »
I setup multi-WAN recently with the Comcrap LTE modem and mDNS repeater stopped working.

I have 2 interfaces; one trusted and one guest. Trusted has 10.18.1.0/24 and Guest has 172.18.1.0/24 on it. I have a rule to pass traffic from a handful of 172.18.1.0/24 IPs to a handful of 10.18.1.0/24 IPs. ICMP/Telnet/HTTP/etc. all work. I ran mdns-repeater in a screen on the router so I could watch with debug enabled. I see essentially nothing:

Code: [Select]
# /usr/local/bin/mdns-repeater -p /var/run/mdns-repeater.pid -f em0 em2
mdns-repeater: dev em0 addr 10.19.76.1 mask 255.255.255.0 net 10.18.1.0
mdns-repeater: dev em2 addr 172.19.76.1 mask 255.255.255.0 net 172.18.1.0

From both wired and wireless clients I can see mDNS/Bonjour devices without issue given I am on that particular network.

I assume this has something to do with multi-WAN, but I'm at a bit of a loss as to where to start.

Thanks in advance for any ideas.
Logged

satchafunkilus

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: mDNS Repeater not working after multi-WAN
« Reply #1 on: June 17, 2023, 02:46:01 am »
Did you ever manage to solve this issue? Facing the same problem here currently and trying to find some solution for it.
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 22.1 Legacy Series »
  • mDNS Repeater not working after multi-WAN
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2024 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2