[Solved] No Outbound NAT rules after upgrading to OPNsense 22.1.5

[svenny]

Hi all,

after upgrading to 22.1.5 I'm not anymore able to surf the web from LAN. The problem seems to be the lack of Outbound NAT rules for WAN interfaces (I'm using Multi-WAN, but for single WAN the problem is the same).

In the page "Firewall: NAT: Outbound" (I'm using "Automatic outbound NAT")  I can see all the rules, but the output of the command "pfctl -sn" shows nothing in regards. In another OPNsense installation, where I did not upgrade to 22.1.5, I can see these rules launching the same command ( "pfctl -sn" ) from shell.

Is there a way to add these rules manually from the command line, so I can state that this is the problem?

Many thanks in advance.

Cheers

[svenny]

I would like to add these instructions to pf.conf manually, but I'm not able to find this file:

Code: [Select]

nat on pppoe2 inet from (em0:network) to any port = isakmp -> (pppoe2:0) static-port
nat on pppoe2 inet from (lo0:network) to any port = isakmp -> (pppoe2:0) static-port
nat on pppoe2 inet from 127.0.0.0/8 to any port = isakmp -> (pppoe2:0) static-port
nat on pppoe2 inet from 10.10.0.0/24 to any port = isakmp -> (pppoe2:0) static-port
nat on pppoe2 inet from (em0:network) to any -> (pppoe2:0) port 1024:65535
nat on pppoe2 inet from (lo0:network) to any -> (pppoe2:0) port 1024:65535
nat on pppoe2 inet from 127.0.0.0/8 to any -> (pppoe2:0) port 1024:65535
nat on pppoe2 inet from 10.10.0.0/24 to any -> (pppoe2:0) port 1024:65535

Don't know why they're not loaded automatically. The difference between this and the other gateway, for which these rules are loaded, is that this link is a PPPoE one...

Thank you for your help.

Cheers

[svenny]

I don't know why, but the following firewall rule was preventing other rules from loading:

Code: [Select]

pass in quick on pppoe2 route-to ( pppoe2 <provider_gateway_ip> ) reply-to ( pppoe2 <provider_gateway_ip> ) inet proto icmp from $My_static_IP to {(pppoe2)} keep state label "0107958196d99255f51b8d5dc140fd65"

This firewall rules was intended to permit ping to the gateway IP from outside.

I was able to find the problem with the following command:

Code: [Select]

root@OPNsense:~ # pfctl -n -f /tmp/rules.debug
/tmp/rules.debug:171: syntax error

After removing this rule from the firewall the rules for "Outbound NAT" of the PPPoE gateway have been restored correctly.

Cheers

[franco]

Validation was added via https://github.com/opnsense/core/commit/77594c8b in 22.1.4. This first and foremost is a configuration issue.


Cheers,
Franco

[svenny]

Perfect! Many thanks Franco.

Cheers