Firewall Live view is only displaying "let out anything..."

[b1nb4sh]

Hello everyone,

first of all opnsense is awesome :) I got a APU4 Board and installed it without and problem.
Currently I have a problem with a device, because something is blocked and I tried to find the connection during the live view.
I labelled all of my rules but non of them are displayed under the live view. I only see "let out anything from the firewall itself" "Default deny rule" and "Block all ipv6".
Is this behavior normal?
To my setup:
APU4
igb0 - wan (No Carp)
igb1 - lagg0
igb2 - lagg0
igb3 - not in use
I have added a carp vip on every vlan for the future use of an HA Setup and this carp vip is my gateway.
Is this wrong? Should I use the IP Alias instead? But is it possible to use an IPAlias as a gateway?

Modem
     |
opnsense (CARP: 192.168.10.1 / 192.168.20.1 / 192.168.30.1 / 192.168.40.1)
     |
lagg0
    |
switch
    |----- vlan 10
    |----- vlan 20
    |----- vlan 30
    |----- vlan 40



   

[b1nb4sh]

Problem has been solved  8)