Why does opnsense wireguard not support RTSP video protocol

Started by shaozhai, January 04, 2022, 08:37:01 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions
January 04, 2022, 08:37:01 AM
Why does opnsense wireguard not support RTSP video protocol？
January 04, 2022, 08:50:19 AM #1
Why do you come to the conclusion it's wireguard itself?
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/
January 04, 2022, 09:16:08 AM #2
My wireguard with openwrt is normal
January 04, 2022, 10:09:07 AM #3
Then it can be everything, wrong setup, missing firewall rule, routing.
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/
January 04, 2022, 10:36:06 AM #4
Except for RTSP video, everything else is fine, I'm sure the Settings are correct!
January 04, 2022, 10:49:22 AM #5
Can you run a packet capture on LAN and WG interface to see if packets are leaving? Screenshots of config? Firewall rules? NAT? Plenty of stuff missing here for others to help
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/
January 04, 2022, 11:53:32 AM #6
January 04, 2022, 12:17:40 PM #7
How to upload pictures?
January 04, 2022, 12:33:43 PM #8
I have attached a few pictures for you :)
Internet: Vodafone Cabel Down: 1Gbit/s, Up: 50Mbit/s |
Router/Firewall: OPNsense 24.1.1-amd64  |
Hardware: Thomas-Krenn.AG LES compact 4L (4GB Ram, 120GB mSATA SSD)
January 04, 2022, 02:02:17 PM #9
firewall nat
January 05, 2022, 12:05:15 AM #10
firewall
Print
Go Up Pages1
User actions