Why does opnsense wireguard not support RTSP video protocol

Started by shaozhai, January 04, 2022, 08:37:01 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions
January 04, 2022, 08:37:01 AM
Why does opnsense wireguard not support RTSP video protocol？
January 04, 2022, 08:50:19 AM #1
Why do you come to the conclusion it's wireguard itself?
January 04, 2022, 09:16:08 AM #2
My wireguard with openwrt is normal
January 04, 2022, 10:09:07 AM #3
Then it can be everything, wrong setup, missing firewall rule, routing.
January 04, 2022, 10:36:06 AM #4
Except for RTSP video, everything else is fine, I'm sure the Settings are correct!
January 04, 2022, 10:49:22 AM #5
Can you run a packet capture on LAN and WG interface to see if packets are leaving? Screenshots of config? Firewall rules? NAT? Plenty of stuff missing here for others to help
January 04, 2022, 11:53:32 AM #6
January 04, 2022, 12:17:40 PM #7
How to upload pictures?
January 04, 2022, 12:33:43 PM #8
I have attached a few pictures for you :)
Internet: Vodafone Cabel Down: 1Gbit/s, Up: 50Mbit/s |
Router/Firewall: OPNsense 24.1.1-amd64  |
Hardware: Thomas-Krenn.AG LES compact 4L (4GB Ram, 120GB mSATA SSD)
January 04, 2022, 02:02:17 PM #9
firewall nat
January 05, 2022, 12:05:15 AM #10
firewall
Print
Go Up Pages1
User actions