Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
21.7 Legacy Series
»
igb on APU4 with OPNS 21.7
« previous
next »
Print
Pages:
1
[
2
]
Author
Topic: igb on APU4 with OPNS 21.7 (Read 6761 times)
lynix
Newbie
Posts: 11
Karma: 1
Re: igb on APU4 with OPNS 21.7
«
Reply #15 on:
August 05, 2021, 07:21:41 pm »
@cookiemonster: Any changes regarding throughput? And did you keep those tunables?
My APU2 delivers ~400 Mbit/s
iperf3
NAT throughput with a single connection and ~938 Mbit/s with 4 concurrent streams. I could swear I had that almost-gigabit throughput on 21.1.9 with one connection but I've got no data to prove it.
Logged
cookiemonster
Hero Member
Posts: 1823
Karma: 95
Re: igb on APU4 with OPNS 21.7
«
Reply #16 on:
August 05, 2021, 09:54:54 pm »
Hi lynxix. My fresh install naturally wiped out my tunables in rc.conf.local and only kept the ones from the gui.
There I only have
hw.igb.rx_process_limit = -1
hw.igb.tx_process_limit = -1
legal.intel_igb.license_ack = 1
I've left those and monitoring but unfortunately I haven't had the opportunity to plug a machine into the WAN side to test NAT throughput. It's in my to-do list.
I've done iperf tests to public iperf servers and the throughput seems unchanged from 21.7 with tunables for igb.
The problem for me is that these I can't tell if they're limited on the public servers. I really need to do the test internally by myself.
My ISP service is just over 500 mbps down. I'd love to know how close or far from it I am.
Also I need to research what it means for the APU with the change to em that I think 21.7 changed to.
How are your tests going?
Logged
lynix
Newbie
Posts: 11
Karma: 1
Re: igb on APU4 with OPNS 21.7
«
Reply #17 on:
August 06, 2021, 09:18:28 am »
Most of the tunables have changed with 21.7. Only one of the three you have mentioned is still there but under a different name:
Code:
[Select]
hw.igb.rx_process_limit --> hw.em.rx_process_limit
Credit goes to Gary7 in
this thread
for clarifying this. For me that tunable doesn't seem to have an effect at all anymore.
With my APU2 I'm reaching ~300 Mbit/s NAT throughput when using a single connection and ~938 Mbit/s with four connections. An important thing to keep in mind is that if you run 'iperf3' on the box itself it will be CPU-bottlenecked, so always measure throughput between two machines with the APU in between.
My ISP gives me ~600 Mbit/s downstream so I really would like to reach that with a single connection. But I have to admit I'm not absolutely sure I had that with 21.1.9. Maybe I just never noticed.
«
Last Edit: August 06, 2021, 09:20:18 am by lynix
»
Logged
Print
Pages:
1
[
2
]
« previous
next »
OPNsense Forum
»
Archive
»
21.7 Legacy Series
»
igb on APU4 with OPNS 21.7