Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
21.1 Legacy Series
»
[Solved] Multiple Subnets Behind L3 switch
« previous
next »
Print
Pages: [
1
]
Author
Topic: [Solved] Multiple Subnets Behind L3 switch (Read 2407 times)
devrandom
Newbie
Posts: 3
Karma: 0
[Solved] Multiple Subnets Behind L3 switch
«
on:
April 30, 2021, 04:45:28 pm »
I am having issues getting my Subnets (behind a L3 switch) to be able to connect to the internet. I am reasonably sure my switch configuration is good as I've had this exact topology working with my Unifi Security Gateway (what I'm trying to replace) as well as a SonicWall and OpenBSD before that. I've attached a diagram of my topology.
My setup:
OPNsense LAN: 10.1.0.0/24
OPNsense LAN IP: 10.1.0.1
L3 Switch LAN IP: 10.1.0.254
Workstations Subnet: 10.1.1.0/24
Servers Subnet: 10.1.2.0/24
Wireless Subnet: 10.1.3.0/24
What works:
- All subnets can ping each other and ping the OPNsense LAN IP (10.1.0.1)
- Any devices on the OPNsense LAN (10.1.0.0/24) and ping the other subnets behind the L3 switch and ping addresses on the internet.
What doesn't work:
- None of the subnets behind the L3 switch can ping the internet
What I've done:
- Created a gateway to the L3 switch.
- Created static routes for the subnets
- Tried creating firewall rules to allow the subnets through the firewall
- Tried disabling Static Route Filtering
Logs:
- When I try to ping external addresses from the subnets behind the L3 switch, I don't see any corresponding log entries. This makes me think it's a routing or NAT issue even though all those subnets can ping the LAN IP of OPNsense.
The only other thing I haven't tried (after reading another post on VPN) that I will when I get home is creating creating an Outbound NAT rule.
I'm at work and will have to wait until I get home to try this.
But I'm curious if anyone else has any suggestions for things I might be missing.
«
Last Edit: May 02, 2021, 03:07:58 am by devrandom
»
Logged
Giant850
Newbie
Posts: 26
Karma: 0
Re: Multiple Subnets Behind L3 switch
«
Reply #1 on:
April 30, 2021, 06:35:48 pm »
I have a similar setup, with a layer3 Mikrotik router on the LAN side of my home network. In order to get those subnets internet access I:
-Created a Firewall alias for the lab network
-Added an outbound NAT rule for the lab network alias to allow WAN access
After I did that, the lab network VMs could route to and from the internet.
Logged
devrandom
Newbie
Posts: 3
Karma: 0
Re: Multiple Subnets Behind L3 switch
«
Reply #2 on:
May 02, 2021, 03:07:19 am »
Thank you very much!
That was exactly what I needed to do and everything is humming along happily now.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
21.1 Legacy Series
»
[Solved] Multiple Subnets Behind L3 switch