Port Forwarding not working

[tilera]

I have a problem, port forwarding is not working with my opnsense instance. I attach an image of the port forwarding rule configuration. It is enabled and also applied and I already googled the problem but found no solution.

[tilera]

Seems like the attachment didn't worked so I try it again

[annoniempjuh]

change the destination to "this firewall" instead of "Wan address", its works for me

[Greelan]

WAN address should work fine. Is your ISP blocking port 443 inbound?

[tilera]

WAN address should work fine. Is your ISP blocking port 443 inbound?

No, the problem is also with other ports and the same IP worked fine with another virtual machine before

[Greelan]

Assume that you’ve kept the default setting to create an associated firewall rule (under Filter rule association in the rule)?

[tilera]

Assume that you’ve kept the default setting to create an associated firewall rule (under Filter rule association in the rule)?

Yes, there I changed nothing. It looks like this

[Greelan]

Hmm, odd. How are you testing to see if the PF works?

[tilera]

Hmm, odd. How are you testing to see if the PF works?

I try to connect via browser

[Greelan]

From inside your LAN? If so could be a NAT reflection issue

[tilera]

From inside your LAN? If so could be a NAT reflection issue

No, from outside

[Fright]

hi!
any clue in logs?
is it the only non-default rules?
can you share all your rules?

[tilera]

hi!
any clue in logs?
is it the only non-default rules?
can you share all your rules?

Yes, it is the only non-default rule. Where I can find the logs?

[Fright]

you can enable logging on rule and look in "Firewall: Log Files: Live View" while checking connection in browser.
can you connect to 192.168.1.4 from OPN itself (eg ' openssl s_client -connect 192.168.1.4:443')?