[Solved] Intel Gigabit (em) driver is missing. FreeBSD 12 works out of the box

[TheLinuxGuy]

I bought an Intel Pro Dual gigabit NIC that is not being detected by opnsense. Installing FreeBSD 12 and it works out of the box without needing a driver.

I tried to compile the if_em.ko from source then copy to /boot/kernerl but kldload complained.

I found an older discussion for 16.7 where some steps were shared - I thought the "os-intel" package was created for this driver? I don't see it anywhere now.

https://forum.opnsense.org/index.php?topic=3706.0
https://forum.opnsense.org/index.php?topic=3689.0

Here is the NIC being detected just fine in BSD 12:

---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE r368787 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): text 80x25
CPU: Common KVM processor (2200.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf61  Family=0xf  Model=0x6  Stepping=1
  Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x80202001<SSE3,CX16,x2APIC,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 8589934592 (8192 MB)
avail memory = 8244654080 (7862 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Launching APs: 2 1 3
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811187c0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfea14000-0xfea14fff at device 1.0 on pci0
vgapci0: Boot video device
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6040-0x605f irq 16 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6060-0x607f irq 17 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6080-0x609f irq 18 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xfea10000-0xfea13fff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection> port 0x5000-0x501f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe83ffff irq 16 at device 0.0 on pci1
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 00:26:55:d9:34:7e
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection> port 0x5020-0x503f mem 0xfe860000-0xfe87ffff,0xfe880000-0xfe89ffff irq 17 at device 0.1 on pci1
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using an MSI interrupt
em1: Ethernet address: 00:26:55:d9:34:7f
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib2: <PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 16 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pcib3: <PCI-PCI bridge> mem 0xfea18000-0xfea18fff irq 16 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <PCI-PCI bridge> mem 0xfea19000-0xfea19fff irq 16 at device 28.3 on pci0
pcib4: [GIANT-LOCKED]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x60a0-0x60bf irq 16 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x60c0-0x60df irq 17 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x60e0-0x60ff irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> mem 0xfe000000-0xfe0000ff irq 21 at device 1.0 on pci2
pci3: <PCI bus> on pcib6
virtio_pci0: <VirtIO PCI Balloon adapter> port 0x4000-0x403f mem 0xfc600000-0xfc603fff irq 20 at device 3.0 on pci3
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI SCSI adapter> port 0x4040-0x407f mem 0xfde40000-0xfde40fff,0xfc604000-0xfc607fff irq 22 at device 5.0 on pci3
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Network adapter> port 0x4080-0x409f mem 0xfde41000-0xfde41fff,0xfc608000-0xfc60bfff irq 23 at device 18.0 on pci3
vtnet0: <VirtIO Networking Adapter> on virtio_pci2
vtnet0: Ethernet address: 6a:41:56:fa:65:69
vtnet0: netmap queues/slots: TX 1/256, RX 1/128
000.000114 [ 445] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
pcib7: <PCI-PCI bridge> mem 0xfe001000-0xfe0010ff irq 22 at device 2.0 on pci2
pci4: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> mem 0xfe002000-0xfe0020ff irq 23 at device 3.0 on pci2
pci5: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> mem 0xfe003000-0xfe0030ff irq 20 at device 4.0 on pci2
pci6: <PCI bus> on pcib9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x6100-0x611f mem 0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xca000-0xcafff,0xcb000-0xcbfff,0xea000-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
da0 at vtscsi0 bus 0 scbus0 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 32768MB (67108864 512 byte sectors)
cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
uhub2: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub3: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
ugen7.2: <QEMU QEMU USB Tablet> at usbus7
lo0: link state changed to UP
vtnet0: link state changed to UP
uhid0 on uhub1
uhid0: <QEMU QEMU USB Tablet, class 0/0, rev 2.00/0.00, addr 2> on usbus7
root@freebsd12:/home/gfm #

[chemlud]

Hmmm, I have here at least 2 boxes with 5 em interfaces (each with 2x Intel dual gigabit PCI cards ) each on the latest 20.7.7_something just doing fine...

[TheLinuxGuy]

Hmmm, I have here at least 2 boxes with 5 em interfaces (each with 2x Intel dual gigabit PCI cards ) each on the latest 20.7.7_something just doing fine...

I should have added more info, sorry (late nights troubleshooting). It doesn't work on Promox with PCIe passthrough. Driver was blacklisted on the host, rebooted. Windows VM see the device just fine and get IPs.

OPNSENSE dmesg and relevant host settings below.

Code: [Select]

root@pve:~# cat /etc/modprobe.d/vfio.conf
options vfio-pci ids=8086:105e
root@pve:~# cat /etc/modprobe.d/blacklist-e1000e.conf
blacklist e1000e

root@pve:~# lspci -n -s 02:00 -v
02:00.0 0200: 8086:105e (rev 06)
        Subsystem: 103c:7044
        Physical Slot: 0-1
        Flags: fast devsel, IRQ 34, NUMA node 0
        Memory at fb5a0000 (32-bit, non-prefetchable) [size=128K]
        Memory at fb580000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at e020 [size=32]
        Expansion ROM at fb560000 [disabled] [size=128K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number 00-26-55-ff-ff-d9-34-7e
        Kernel driver in use: vfio-pci
        Kernel modules: e1000e

02:00.1 0200: 8086:105e (rev 06)
        Subsystem: 103c:7044
        Physical Slot: 0-1
        Flags: fast devsel, IRQ 35, NUMA node 0
        Memory at fb540000 (32-bit, non-prefetchable) [size=128K]
        Memory at fb520000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at e000 [size=32]
        Expansion ROM at fb500000 [disabled] [size=128K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number 00-26-55-ff-ff-d9-34-7e
        Kernel driver in use: vfio-pci
        Kernel modules: e1000e

root@pve:~# cat /etc/pve/qemu-server/133.conf
balloon: 0
boot: order=scsi0;ide2;net0
cores: 4
cpu: kvm64,flags=+aes
hostpci0: 02:00,pcie=1
ide2: none,media=cdrom
machine: q35
memory: 2048
name: fw
net0: virtio=22:3D:18:2C:41:81,bridge=vmbr1,queues=8
net1: virtio=02:D4:36:BD:EA:5A,bridge=vmbr1,link_down=1,queues=8
net2: e1000=7E:DB:A0:81:E2:1B,bridge=vmbr1,link_down=1
numa: 0
onboot: 1
ostype: l26
parent: vanilla
scsi0: local-zfs:vm-133-disk-0,iothread=1,size=40G
scsihw: virtio-scsi-single
smbios1:

root@OPNsense:~ # dmesg
---<<BOOT>>---
Copyright (c) 2013-2019 The HardenedBSD Project.
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p11-HBSD #0  74f1f081a1e(stable/20.7)-dirty: Fri Dec  4 13:40:15 CET 2020
    root@sensey64:/usr/obj/usr/src/amd64.amd64/sys/SMP amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): text 80x25
HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000).
CPU: Common KVM processor (2200.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf61  Family=0xf  Model=0x6  Stepping=1
  Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x82202001<SSE3,CX16,x2APIC,AESNI,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 2147483648 (2048 MB)
avail memory = 2040836096 (1946 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Launching APs: 2 1 3
wlan: mac acl policy registered
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19
000.000054 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfea14000-0xfea14fff at device 1.0 on pci0
vgapci0: Boot video device
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6040-0x605f irq 16 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6060-0x607f irq 17 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6080-0x609f irq 18 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xfea10000-0xfea13fff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 16 at device 28.0 on pci0
pcib1: Failed to allocate interrupt for PCI-e events
pcib2: <PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 16 at device 28.1 on pci0
pcib2: Failed to allocate interrupt for PCI-e events
pcib3: <PCI-PCI bridge> mem 0xfea18000-0xfea18fff irq 16 at device 28.2 on pci0
pcib3: Failed to allocate interrupt for PCI-e events
pcib4: <PCI-PCI bridge> mem 0xfea19000-0xfea19fff irq 16 at device 28.3 on pci0
pcib4: Failed to allocate interrupt for PCI-e events
uhci3: <Intel 82801I (ICH9) USB controller> port 0x60a0-0x60bf irq 16 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x60c0-0x60df irq 17 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x60e0-0x60ff irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> mem 0xfe000000-0xfe0000ff irq 21 at device 1.0 on pci1
pci2: <PCI bus> on pcib6
virtio_pci0: <VirtIO PCI Network adapter> port 0x4000-0x403f mem 0xfdee0000-0xfdee0fff,0xfc600000-0xfc603fff irq 23 at device 18.0 on pci2
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
vtnet0: Ethernet address: 22:3d:18:2c:41:81
vtnet0: netmap queues/slots: TX 8/256, RX 8/128
000.000114 [ 447] vtnet_netmap_attach       vtnet attached txq=8, txd=256 rxq=8, rxd=128
virtio_pci1: <VirtIO PCI Network adapter> port 0x4040-0x407f mem 0xfdee1000-0xfdee1fff,0xfc604000-0xfc607fff irq 20 at device 19.0 on pci2
vtnet1: <VirtIO Networking Adapter> on virtio_pci1
vtnet1: Ethernet address: 02:d4:36:bd:ea:5a
vtnet1: netmap queues/slots: TX 8/256, RX 8/128
000.000115 [ 447] vtnet_netmap_attach       vtnet attached txq=8, txd=256 rxq=8, rxd=128
em0: <Intel(R) PRO/1000 Network Connection> port 0x4080-0x40bf mem 0xfdec0000-0xfdedffff irq 21 at device 20.0 on pci2
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Ethernet address: 7e:db:a0:81:e2:1b
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib7: <PCI-PCI bridge> mem 0xfe001000-0xfe0010ff irq 22 at device 2.0 on pci1
pci3: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> mem 0xfe002000-0xfe0020ff irq 23 at device 3.0 on pci1
pci4: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> mem 0xfe003000-0xfe0030ff irq 20 at device 4.0 on pci1
pci5: <PCI bus> on pcib9
virtio_pci2: <VirtIO PCI SCSI adapter> port 0x1000-0x103f mem 0xfd800000-0xfd800fff,0xfc000000-0xfc003fff irq 21 at device 1.0 on pci5
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x6100-0x611f mem 0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xca000-0xcafff,0xcb000-0xcbfff,0xea000-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 10.000 msec
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
da0 at vtscsi0 bus 0 scbus0 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 40960MB (83886080 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub1: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen7.2: <QEMU QEMU USB Tablet> at usbus7
uhid0 on uhub3
uhid0: <QEMU QEMU USB Tablet, class 0/0, rev 2.00/0.00, addr 2> on usbus7
lo0: link state changed to UP
aesni0: No AES or SHA support.
vtnet0: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled


[TheLinuxGuy]

After several hours troubleshooting I found that for some reason QEMU/Proxmox + Passthrough + OPNsense with setting "pcie=on" will not work correctly with this card.

After editing this

Code: [Select]

hostpci0: 02:00,pcie=1
to

Code: [Select]

hostpci0: 02:00
the interfaces started working and being detected. In FreeBSD 12 it works with the pcie setting.