Can't seem to get SIP working

[mimugmail]

Packet capture in UI which only displays IPs and Ports is fine

[leprejohn]

Sorry to bump an old thread.

I'm also facing the same issue, SIP being blocked by the default rule, when I run a packet capture it looks good

Code Select Expand

Interface Capture output
WAN
hn0 17:19:25.796754 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:26.296327 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:27.397625 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:29.397009 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:33.395182 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887

Did you manage to get your SIP fixed? If so how? As my SIP trunk provider gave me a SIP proxy address.

[FullyBorked]

Sorry to bump an old thread.

I'm also facing the same issue, SIP being blocked by the default rule, when I run a packet capture it looks good

Code Select Expand

Interface Capture output
WAN
hn0 17:19:25.796754 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:26.296327 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:27.397625 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:29.397009 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887
WAN
hn0 17:19:33.395182 IP 185.26.240.4.5060 > 188.223.75.170.5060: UDP, length 887

Did you manage to get your SIP fixed? If so how? As my SIP trunk provider gave me a SIP proxy address.

No never got it figured out.  I gave up.  And I'm at a different job now so don't have the same need. 

Sent from my IN2025 using Tapatalk