Internet on WAN disconnect every weekend (and up again after interface restart)

[ark]

Hello, I have this weird problem where I lost internet connection every weekends (saturday or sunday at specific time), only after I restarted the WAN interface or router then the problem goes away... until next week.

My current configuration is Intel nuc with USB EA300 gigabit (RTL8153) to wan port) virtualized in proxmox and OpnSense 20.7.3, WAN is connected to ISP GPON fiber optic modem (ZTE) and using bridged configuration to bypass NAT. Previously I had similar problem with snapshot OpenWRT on Raspberry Pi 4 and same USB Gigabit ethernet. At first I thought it's unstable USB Gigabit ethernet but this is the 3rd adapter that I've tried and all shows similar problem.

When I tried view OpnSense backend log, there was almost no weird log during internet loss except that during the disconnect I noticed that in WAN connection :

Code: [Select]

dhclient[53240] bound to 10.88.138.210 -- renewal in 1800 seconds.changed to this after restarting interface

Code: [Select]

dhclient[66388] bound to 10.88.142.56 -- renewal in 1800 seconds.
It seems that my ISP issues DHCP refresh every 30 minutes or so, and every week on saturday or sunday it changes the subnet segment which both OpenWRT and OpnSense failed to receive new IP's, I haven't tried using non USB ethernet for WAN Port though.

Is there a script to detect subnet change in WAN and initiate interface restart?

[paul_a2]

Firewall -> Advanced - scroll to end to find "Dynamic state reset". Maybe checking that will help?

[ark]

Thanks will try that. The results will probably can be seen for another weeks though as the wan only change ip subnet every weekends.

[ark]

After waiting for next WAN IP restart, similar problem still occured. getting WAN DHCP address (different subnet) but no internet connection that only after restarting OpnSense internet went back online again.

After this I tried changing some options in WAN :
1. uncheck

Code: [Select]

"block private networks" since my WAN IP Address is still private network (10.x.x.x)
2. check

Code: [Select]

"enable dynamic gateway policy" (I don't really quite understand about this option though)

Hopefully I got new results next week when my WAN IP address automatically refreshes from the ISP side.

[ark]

I think I found the problem, disabling WAN ipv6 and now everytime ISP Gateway issues new ipv4 ip address it handles normally (wan gateway never have ipv6 anyway), hopefully this resolve the problem.