Sync interfaces changes in OPNSense HA

Started by mmaridev, September 24, 2020, 05:46:37 PM

Previous topic - Next topic
Hi,

we were trying to setup HA in OPNSense but encountered the following issue: when we add a new interface to the master (e.g. a VLAN), which occurs often, the same interface isn't created in the slave. Therefore,
1. the slave can't handle the new interface if necessary;
2. if you create a new interface in the slave in an ordred that is not congruent with the master (opt3 -> opt2) you'll get many troubles.

Any way this can be fixed? Top would be that when we create a new VLAN in the master this is created in the slave too.

Thanks,
Marco

You have to create them in the correct order in both, no other chance
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

May we convert this into a feature request?

I rather think this is a documentation issue
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

Yeah. It seems kinda self explanatory that the firewalls interfaces need to be configured the same in order to be a HA-pair.
26.7.7|Intel N150|4x3.6GHz|8GB|256GB NVMe
Cisco L3 switch OSPF->FRR+BFD
Chrony|DoT|HAProxy+NAXSI|Suricata+Wazuh|NetFlow->Akvorado
IPSec|OpenVPN|Wireguard
MultiWAN: 1Gbit fiber dual stack + Cellular failover (PPP)

--
Available for private support.

https://docs.opnsense.org/manual/how-tos/carp.html#setup-interfaces-basic-firewall-rules
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

Okay thanks but this would be anyway a cool feature though. Maybe just for the "virtual" interfaces? Some proprietary firewall has this feature.