Ryzen 3 3100 no thermal data

[Darwin100]

Dear All, I am testing an AMD Ryzen 3 3100 on MSI B450I mini-itx motherboard. The installation process using the serial installer was without problem and very fast.

I was interested in observing two things; (1) does OpnSense 20.1 detect the onboard Intel 3168 WiFi chip as it is listed as supported in FreeBSD (https://www.freebsd.org/cgi/man.cgi?query=iwm&sektion=4) and (2) what does OpnSense report for the CPU thermals.

What I have observed is no wireless hardware has been detected and there is no thermal data reported when the None/ACPI or AMD K8/K10 modules selected.

I will be checking the hardware logs to see if the hardware is detected during boot in relation to Intel Wifi and is the thermal data issue related to a similiar forum post where it is suggested the AMD CPU is "too new" for the underlying FreeBSD operating system.

Can anyone provide insight into these issue please based on their knowledge and/or experience?

Regards PeterB.

[Darwin100]

I also ran "pciconf -l -bcev" from putty shell and found this so has OpnSense has detected the hardware?:



 vendor     = 'Intel Corporation'
    device     = 'Dual Band Wireless-AC 3168NGW [Stone Peak]'
    class      = network
    bar   [10] = type Memory, range 64, base 0xfca00000, size 8192, enabled
    cap 01[c8] = powerspec 3  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit
    cap 10[40] = PCI-Express 2 endpoint max data 128(128) FLR RO NS
                 link x1(x1) speed 2.5(2.5) ASPM disabled(L1)
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 0003[140] = Serial 1 087190ffff36c4c3
    ecap 0018[14c] = LTR 1
    ecap 001e[154] = unknown 1
vgapci0@pci0:41:0:0:    class=0x030000 card=0x90b8103c chip=0x67711002 rev=0x00 hdr=0x00

[franco]

Listing PCI data != detecting and using a driver, if one is even available.


Cheers,
Franco

[Darwin100]

Dear Franco, Acknowledged.

It is my intention to install one of the FreeBSD desktop operating systems and see what falls out from that exercise. My hope is the hardware is detected and assigned a driver. I will post result once I find the time to do this. Do you recommend a flavour of FreeBSD operating system that I might try that lines up closely tot he base operating system OpnSense is built upon?

In relation to the absence of CPU thermal data, what is your thought on that issue?

Regards Peter.

[franco]

Hi Peter,

It might be this one:

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=239607

I'll add it to OPNsense 20.7, but no way to backport to 20.1. It seems it isn't even part of FreeBSD 12.1.

https://github.com/opnsense/src/commit/530dab51099


Cheers,
Franco

[Darwin100]

Dear Franco,

Affirmative on OpnSense 20.7 for AMD Ryzen 3 3100.

Thank you.