IPv6 DHCP gives IP to wrong VLAN ?

[Bytechanger]

My PC [LAN] get a IPv6-Address, but shows "no internet connection". And internet site test to ipv6 failed.
On PC field "IPv6-Gateway" is empty! So there is no ipv6 Gateway set (router itself).
When I set it manualy to Interface IPv6, it works.
But why it isn´t set automatically?

my actual settings:
Interfaces->
[LAN] IPv6 address xxx:xx:xxx:8000:201:2eff:fe92:8584 / 64
[Kamera] IPv6 address xxx:xx:xxx:8001:201:2eff:fe92:8584 / 64
[Gast] IPv6 address xxx:xx:xxx:8002:201:2eff:fe92:8584 / 64

Service->DHCPv6
[LAN]
Subnet xxxx:xx:xxx:8000::
Subnet mask  64 bits
Current LAN IPv6 prefix xxxx:xx:xxx:8000::
Available prefix delegation size  57
Available range xxxx:xx:xxx:8000:: - xxxx:xx:xxx:8000:ffff:ffff:ffff:ffff                                       
Prefix subnet will be prefixed to the available range.
Range: ::1000 to ::2000

[Kamera]
Subnet xxxx:xx:xxx:8000::
Subnet mask  64 bits
Current LAN IPv6 prefix xxxx:xx:xxx:8001::
Available prefix delegation size  57
Available range xxxx:xx:xxx:8001:: - xxxx:xx:xxx:8001:ffff:ffff:ffff:ffff                                       
Prefix subnet will be prefixed to the available range.
Range: ::1000 to ::2000

[Gast]
Subnet xxxx:xx:xxx:8002::
Subnet mask  64 bits
Current LAN IPv6 prefix xxxx:xx:xxx:8002::
Available prefix delegation size  57
Available range xxxx:xx:xxx:8002:: - xxxx:xx:xxx:8002:ffff:ffff:ffff:ffff                                       
Prefix subnet will be prefixed to the available range.
Range: ::1000 to ::2000


Greets

Byte

[Maurice]

Did you properly configure Router Advertisements? You have to do that manually if you allow manual adjustment of DHCPv6 and Router Advertisements in the interface settings. Or just disable that if you want to use the automatic settings.

[Bytechanger]

Hi,

thanks for anwerting.
found it.
Can you tell me, how it is filled best for me?



Greets

Byte

[Bytechanger]

OK, thanks for the best help.
It seems, that it works now!

Thank you.

Greets

Byte