OPNSENSE in HA Mode Freeze after 10 minutes

Started by ednt, April 02, 2020, 11:40:40 AM

Previous topic - Next topic
In our datacenter we have two OPN Sense in HA Mode

We run this 2 units (master and slave) on HP G8 with redundant DISK mirrored with a spare disk.

We have the problem that the Master freeze after 10 Minutes and we can“t access the system anymore.
There is no error message or something else. It looks like the kernel simply stops.
We have changed the complete Hardware without Success.

We use a NC 523SFP dual 10G Port Ethernet Card with the Qlogic Driver. (if_qlgxb)

We are on the latest software (20.1.3)


The internet traffic is on the ql0 interface
All other networks are on the ql1 in different VLANs also the HA-SYNC.

The HA ist provided by CARP

Is the error is known?


Maybe it started with 20.1.3, because before everything worked fine.
But we installed the HA-Proxy together with the upgrade.
So it can also HA-Proxy related.

If the slave is active everything on the slave works fine.
The slave uses the same hardware and the same software version.