Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
20.1 Legacy Series
»
outbound NAT
« previous
next »
Print
Pages: [
1
]
Author
Topic: outbound NAT (Read 2713 times)
dyoung
Newbie
Posts: 2
Karma: 0
outbound NAT
«
on:
February 07, 2020, 01:21:33 am »
Working with 20.1 that has been factory reset for testing.
LAN interface
DHCP is assigning this interface 192.168.2.222
Route added -- 193.168.1.0/24 -> 192.168.2.222
WAN interface is connected to DD WRT router for testing.
DD WRT is assigned 193.168.1.1
DHCP has assigned WAN interface 193.168.1.129
Route added -- 192.168.2.0/24 -> 193.168.1.129
When using automatic NAT rules:
LAN 127.0.0.0/8 * * 500 LAN * YES Auto created rule for ISAKMP
LAN 127.0.0.0/8 * * * LAN * NO Auto created rule
WAN 127.0.0.0/8 * * 500 WAN * YES Auto created rule for ISAKMP
WAN 127.0.0.0/8 * * * WAN * NO Auto created rule
Packet captures on the WAN interface while ping is running and connection to DD WRT web interface:
WAN em0 00:30:10.025146 IP 192.168.2.170.41638 > 193.168.1.1.80: tcp 0
WAN em0 00:30:10.025267 IP 193.168.1.1.80 > 192.168.2.170.41638: tcp 0
WAN em0 00:30:10.025493 IP 192.168.2.170.41638 > 193.168.1.1.80: tcp 0
WAN em0 00:30:10.026023 IP 193.168.1.1.80 > 192.168.2.170.41638: tcp 0
WAN em0 00:30:10.856352 IP 192.168.2.170 > 193.168.1.1: ICMP echo request, id 6171, seq 12, length 64
WAN em0 00:30:10.857010 IP 193.168.1.1 > 192.168.2.170: ICMP echo reply, id 6171, seq 12, length 64
WAN em0 00:30:11.037881 IP 192.168.2.170.41640 > 193.168.1.1.80: tcp 0
WAN em0 00:30:11.038510 IP 193.168.1.1.80 > 192.168.2.170.41640: tcp 0
WAN em0 00:30:11.038765 IP 192.168.2.170.41640 > 193.168.1.1.80: tcp 0
WAN em0 00:30:11.862251 IP 192.168.2.170 > 193.168.1.1: ICMP echo request, id 6171, seq 13, length 64
WAN em0 00:30:11.862909 IP 193.168.1.1 > 192.168.2.170: ICMP echo reply, id 6171, seq 13, length 64
No NAT Translation.
When I use Manual outbound NAT rules:
WAN LAN net * * * Interface address * NO
WAN LAN net icmp/ * * icmp/ * Interface address * NO
Packet captures on the WAN interface while ping is running and connection to DD WRT web interface:
WAN em0 00:37:07.374455 IP 192.168.2.170 > 193.168.1.1: ICMP echo request, id 6171, seq 426, length 64
WAN em0 00:37:07.375152 IP 193.168.1.1 > 192.168.2.170: ICMP echo reply, id 6171, seq 426, length 64
WAN em0 00:37:08.380369 IP 192.168.2.170 > 193.168.1.1: ICMP echo request, id 6171, seq 427, length 64
WAN em0 00:37:08.381022 IP 193.168.1.1 > 192.168.2.170: ICMP echo reply, id 6171, seq 427, length 64
WAN em0 00:37:08.561750 IP 193.168.1.129.29196 > 193.168.1.1.80: tcp 0
WAN em0 00:37:08.562372 IP 193.168.1.1.80 > 193.168.1.129.29196: tcp 0
WAN em0 00:37:08.562658 IP 193.168.1.129.29196 > 193.168.1.1.80: tcp 0
WAN em0 00:37:09.042284 IP 193.168.1.129.29196 > 193.168.1.1.80: tcp 328
NAT translates HTTP but not ICMP.
Not sure what I am missing. Everything else seems pretty self explanatory.
«
Last Edit: February 07, 2020, 01:40:40 am by dyoung
»
Logged
dyoung
Newbie
Posts: 2
Karma: 0
Re: outbound NAT
«
Reply #1 on:
February 08, 2020, 01:51:15 am »
UPDATE
Don't like this for an answer, but rebooted today and now the automatic outbound NAT works.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
20.1 Legacy Series
»
outbound NAT