Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
19.7 Legacy Series
»
[SOLVED - Sort of] OPNsense and VPN Tunnels with Dynamic IPs
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED - Sort of] OPNsense and VPN Tunnels with Dynamic IPs (Read 3047 times)
benjammin1001
Newbie
Posts: 4
Karma: 0
[SOLVED - Sort of] OPNsense and VPN Tunnels with Dynamic IPs
«
on:
January 20, 2020, 09:24:47 am »
Hi there,
I'm new to OPNsense and I'm looking to replace my old Netscreen-25 (don't laugh) and while about everything on OPNsense looks like I'm good to go, I think I've run into a snag.
I'm currently using a mix of
Dial VPN (ok, OPNsense looks to do that via Mobile VPN)
Static VPN site-to-site tunnels (Both Sites are on Static IPs with MainMode negotiation)
Partial Static/Dynamic VPN tunnels (One site is static, the other is dynamic)
The last one looks like the sticker. In ScreenOS and JunOS (for newer Juniper units), the remote gateway doesn't necessarily have to have an IP entered in the near gateway. Just a unique host-id of sorts and aggressive mode negotiations.
Am I correct in this conclusion or is there a way to do this I'm not seeing?
Thanks!
-Ben
«
Last Edit: January 23, 2020, 01:26:47 am by benjammin1001
»
Logged
chemlud
Hero Member
Posts: 2486
Karma: 112
Re: OPNsense and VPN Tunnels with Dynamic IPs
«
Reply #1 on:
January 20, 2020, 09:50:12 am »
Use a DynDNS service of your choice for the dynamic IP(s), configure it in OPNsense to be updated and in openVPN site-to-site to be used and you're done. Work's like a charm in many, many installs... :-)
Logged
kind regards
chemlud
____
"The price of reliability is the pursuit of the utmost simplicity."
C.A.R. Hoare
felix eichhorns premium katzenfutter mit der extraportion energie
A router is not a switch - A router is not a switch - A router is not a switch - A rou....
benjammin1001
Newbie
Posts: 4
Karma: 0
Re: OPNsense and VPN Tunnels with Dynamic IPs
«
Reply #2 on:
January 20, 2020, 03:59:57 pm »
The remote ends that are dynamic aren't running OPNsense and don't support DynDNS in all cases.
Also, I'm not the owner of the remote equipment.
So it sounds like that's a "no".
Dang. I'm bummed. I was really looking forward to switching to this.
Thanks for your quick reply!
Logged
chemlud
Hero Member
Posts: 2486
Karma: 112
Re: OPNsense and VPN Tunnels with Dynamic IPs
«
Reply #3 on:
January 20, 2020, 04:17:16 pm »
Reverse ssh tunnel? DynDNS does not necessarily need to run on OPNsense and other router/firewalls have this functionallity as well...
Logged
kind regards
chemlud
____
"The price of reliability is the pursuit of the utmost simplicity."
C.A.R. Hoare
felix eichhorns premium katzenfutter mit der extraportion energie
A router is not a switch - A router is not a switch - A router is not a switch - A rou....
benjammin1001
Newbie
Posts: 4
Karma: 0
Re: OPNsense and VPN Tunnels with Dynamic IPs
«
Reply #4 on:
January 20, 2020, 07:38:40 pm »
I appreciate the suggestions - but that's not really an option considering the equipment in use.
Really, I just needed a Yes/No on the original question in case I was missing something.
It would appear that answer is still "no'.
Thus, being the case, I'll probably go toss that in the suggestions-box since most of the mainstream boxes I've used support it.
Thanks again,
-Ben
Logged
benjammin1001
Newbie
Posts: 4
Karma: 0
Re: OPNsense and VPN Tunnels with Dynamic IPs
«
Reply #5 on:
January 23, 2020, 01:26:17 am »
As I thought about it some more:
Do the Dev's normally real the forum?
Is there a better method to get a request to the Dev's on this kind of item?
«
Last Edit: January 23, 2020, 01:28:16 am by benjammin1001
»
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
19.7 Legacy Series
»
[SOLVED - Sort of] OPNsense and VPN Tunnels with Dynamic IPs