Wireguard Gateway

[mimugmail]

If you tick "Disable Routes" why should all traffic go through wireguard?

[Voodoo]

I have no idea, but when i set allowed ip's to 0.0.0.0/0 on endpoint and restarted the wireguard service, all interfaces went down, nothing was able to ping. So it interfered with everything. I had to revert the allowed ip setting and do a state reset. Nothing else was changed.

I read some other threads and they set allowed ip's to 0.0.0.0/0, so im sure this is the problem im facing with wireguard. The reason no traffic is routed trough the vpn from my local client. Is my assumption right ? I could not find any other clue. I mean i can ping the gateway from my local client, nat and pbr are working fine, its just that other traffic is never received at the gateway, so opnsense seems to not route it.

I will try this again tommorow when i have some time to actually debug the outtake. I had to revert the change immediately without taking a look.

[Voodoo]

Really strange, i tried again this morning, was prepared for another outtake. But it worked this time, my client is routed over the gateway now, everything works...

The only thing changed is allowed ip's to 0.0.0.0/0 like before.