shutdown Opnsese 19 from UPS [SOLVED]

[bdario]

Hello mimugmail,
I made a clear installation of rel 19.7
then via console I wrote the command "pkg install os-nut-devel" (it ended fine)
after this in Lobby -> Dashboard -> widget Services I find as follow:
service "nut_upsmon" description "Network UPS Monitor" seems started (it's marked in green color)
service "nut_daemon" description "Network UPS Tools" doesn't start (it remains marked in red colour)
obviously the UPS doesn't shutdown the appliance
any suggestion?
feel free to ask me for any test
Thank so much
Dario

[mimugmail]

Did you enable the driver via dropdown list?

[bdario]

yep of course
Riello-driver
enable
Extra Arguments: "port=Auto"

[bdario]

after a reboot it seems to work
now in Services -> Nut -> Diagnostics I find data
but disconnecting the UPS from the line th appliance doesn't shut down
Perhaps the UPS needs to reach the end of the battery charge before send the shutdown command to the appliance?
In this case is there a way to force the graceful shutdown?
Thank you
Dario

[mimugmail]

Can you have a look at system.log and then disconnect cable and connect again?

[mimugmail]

after a reboot it seems to work
now in Services -> Nut -> Diagnostics I find data
but disconnecting the UPS from the line th appliance doesn't shut down
Perhaps the UPS needs to reach the end of the battery charge before send the shutdown command to the appliance?
In this case is there a way to force the graceful shutdown?
Thank you
Dario

It shuts firewall down when battey is below 10%

[bdario]

Thank you
I'll wait for it
Best regards
Dario

[bdario]

ok
now it seems to work fine
Great job
Thank you so much
Dario

[franco]

Hi Dario et al,

This be part of the upcoming 19.7.2 release.

Thanks for testing!


Cheers,
Franco