Reboot loop on fresh install

[temporal-agent]

I have a fresh install of OPNsense 19.1.6-amd64 that is rebooting repeatedly. Using SSH or webGUI seems to increase the frequency of the reboots.  The system.log doesn't show any problems, it just stops whatever it was doing and then records the bootup. 
No plugins installed and minimally configured.

Is there a way to enable more verbose logging?
Is this hardware incompatible?

System stats:
MB:  ECS KBN-I2100 v1.1
CPU: AMD E1-2100 APU with Radeon(TM) HD Graphics     (998.15-MHz K8-class CPU)
RAM: 8589934592 (8192 MB)

em0:  <Intel(R) PRO/1000 Network Connection 7.6.1-k>
em1:  <Intel(R) PRO/1000 Network Connection 7.6.1-k>
em2:  <Intel(R) PRO/1000 Network Connection 7.6.1-k>
em3:  <Intel(R) PRO/1000 Network Connection 7.6.1-k>
iwn0: <Intel Centrino Ultimate-N 6300>
re0:  <Realtek PCIe GBE Family Controller>

ada0:     <TEAML5Lite3D120G R0302A0> ACS-2 ATA SATA 3.x device
aesni0:   <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5

[franco]

No crash reports at all? It could be the hardware...


Cheers,
Franco

[temporal-agent]

Yea, nothing. 

I pulled all non-essential hardware out.
I replaced all the cables, inside and out.
I even swapped out the power supply and connected it to a UPS.

So that just leaves the RAM or the motherboard/CPU.
And it runs Linux & Windows fine...

Reference: https://docs.netgate.com/pfsense/en/latest/hardware/unexpected-reboot-troubleshooting.html

[weust]

If the log doesn't report shutting down for a reboot, it crashes and boots. It's not rebooting.

You link to a Netgate page, is the hardware Netgate?

If it has replaceable memory, I would start there or run a memtest if you can.

[temporal-agent]

If the log doesn't report shutting down for a reboot, it crashes and boots. It's not rebooting.

You link to a Netgate page, is the hardware Netgate?

If it has replaceable memory, I would start there or run a memtest if you can.

• Yes, technically it is not rebooting. It runs and then suddenly without warning or error, BIOS is booting up the system again.
• I linked to the page as a reference on standard FreeBSD Troubleshooting of Unexpected Reboots (their phrase, not mine).  It is not NetGate hardware.  It's an ECS KBN-I2100 motherboard (see initial post for hardware details).
• I have run Memtest 86 for 19+ hours without error.  I have run all the stress/burnin tests I can find, all without error.

I can find nothing wrong other than the symptom of seemingly random and sudden booting.  Using it seems to hasten the booting, i.e., SSH, WebGUI, or network traffic.  I have done everything I can think to do to find the cause.

Is there any additional debugging or logging I can do?

[weust]

I read your specs in the first post as something POST would show.

Have you tried installing FreeBSD itself, or perhaps HardenedBSD to see if any of those two plain installation will crash the system as well?

[chemlud]

The board looks good, but the customer experience is slightly underwhelming, at the best:

Code: [Select]

Cons: Very picky with BIOS settings for particular OS's, limited driver availability, no response from tech support

Code: [Select]

Bought this originally to build a pfsense firewall. For whatever reason pfsense did not want to boot on this hardware. Tried numerous times.

Code: [Select]

i cant get it to reboot, it will shut down and all i get is a flashing underline cursor when it is trying to come up.
I have to cycle power to get it to come up

Code: [Select]

It reboots every few minutes.
Absolutely the worst purchase I have ever made on newegg.
...

[franco]

Shall we move this topic to hardware then? Which device is this specifically?


Cheers,
Franco

[weust]

Hardware: http://www.ecs.com.tw/ECSWebSite/Product/Product_Overview/EN/Motherboard/KBN-I%202100%20-LL-V1-DO-1-RR-/AMD%20CPU%20on%20Board

Looking it up the hardware doesn't have a very good reputation it seems.

[temporal-agent]

...  Have you tried installing FreeBSD itself, or perhaps HardenedBSD to see if any of those two plain installation will crash the system as well?

I haven't, but I will. I'll reply with results.

Shall we move this topic to hardware then? ...

Sounds fine to me.

[temporal-agent]

I have FreeBSD 11.2-RELEASE-p9 amd64 running and patched.
I have running stress on it without incident.

Any ideas on how I can instigate a crash?

Perhaps running dtrace on the OPNsense install?

[rjdza]

Having the same problem with an HP MicroServer N40L.  https://n40l.fandom.com/wiki/Base_Hardware_N40L

AMD CPU, AMD GPU.

Machine has 4GB RAM.

ubuntu and ClearOS install without problems, pfSense installs with no problems, and FreeBSD installs with no problems.

This appears to be a hardened BSD issue.

Jason