Author Topic: [SOLVED] DynDNS: Setting Custom results in Hostname contains invalid characters (Read 6686 times)

weust · « **on:** February 28, 2015, 11:28:10 am »

I am running 1.15.6.1-LibreSSL and setting up a Custom Service type for Duck DNS.
Only the Update URL, Result Match and Description fields are used, but when I Save it shows an error.

Quote

The following input errors were detected:
•The Hostname contains invalid characters.

What Hostname?

franco · « **Reply #1 on:** March 04, 2015, 12:37:14 pm »

The field labeled "Hostname" apparently has invalid characters. Can you share the input? Also privately on IRC. It seems there is some magic involved for unconventional setups.

chemlud · « **Reply #2 on:** March 04, 2015, 01:28:20 pm »

Hi!

Had the same problem recently with pfsense. The DNS provider says, I should use

update.spdns.de/nic/update?hostname=<domain>&myip=<ipaddr>

but the only way to make it work is

www.spdns.de/nic/update?hostname=....

See the difference? ;-)

Did you take the pfSense-specific update-code from the duck DNS install page? Then I'm out...

regards

chemlud

weust · « **Reply #3 on:** March 04, 2015, 01:45:50 pm »

I did. And that was working in pfSense just fine.

franco is on it right now. We're discussing it on IRC atm.

franco · « **Reply #4 on:** March 04, 2015, 06:08:44 pm »

Fix will be part of 15.1.7.1 or 15.1.8, whichever comes out first.

Author Topic: [SOLVED] DynDNS: Setting Custom results in Hostname contains invalid characters (Read 6686 times)

weust

[SOLVED] DynDNS: Setting Custom results in Hostname contains invalid characters

franco

Re: Dynamic DNS: Setting Custom results in The Hostname contains invalid characters

chemlud

Re: Dynamic DNS: Setting Custom results in The Hostname contains invalid characters

weust

Re: Dynamic DNS: Setting Custom results in The Hostname contains invalid characters

franco

Re: [SOLVED] DynDNS: Setting Custom results in Hostname contains invalid characters