OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 18.7 Legacy Series »
  • Port forwarding rule not working?
« previous next »
  • Print
Pages: [1]

Author Topic: Port forwarding rule not working?  (Read 1742 times)

jcdick1

  • Newbie
  • *
  • Posts: 32
  • Karma: 0
    • View Profile
Port forwarding rule not working?
« on: December 14, 2018, 02:44:57 am »
I'm on OPNsense 18.7.8, and I have a port forward rule that doesn't seem to work, and I'm not sure why.

WAN   TCP/UDP   *   *   WAN address   2400           192.168.1.200   2400      <--Works fine
WAN   TCP           *   *   WAN address   2222           192.168.1.100   2222      <--Connection timeout

The service on 192.168.1.100:2222 responds fine if I'm on the LAN.  And it is definitely TCP-only, as it is an SSH-based service.  But I have tried changing it to TCP/UDP, but it made no difference.

The port forward that works fine is used for an automated system with a remote client, so I have no way to manually confirm that it is working, I just have to take the reports' word for it.  Which is "Yes, the service is accessible."

I don't know exactly what to look for in the logs.  If someone could give me a clue on that one, I can go poke around in there and see if maybe the firewall is acting like this rule doesn't exist or something.

Any suggestions?

Thanks!
Logged

ruggerio

  • Sr. Member
  • ****
  • Posts: 290
  • Karma: 11
    • View Profile
Re: Port forwarding rule not working?
« Reply #1 on: December 14, 2018, 09:51:21 am »
do you have also a rule on the lan interface for port 2222/tcp?
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 18.7 Legacy Series »
  • Port forwarding rule not working?
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2