Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
OPNsense 18.7.8 in VM on XCP-ng 7.5.1 ... slow throughput
« previous
next »
Print
Pages: [
1
]
Author
Topic: OPNsense 18.7.8 in VM on XCP-ng 7.5.1 ... slow throughput (Read 3831 times)
jcdick1
Newbie
Posts: 36
Karma: 1
OPNsense 18.7.8 in VM on XCP-ng 7.5.1 ... slow throughput
«
on:
November 30, 2018, 07:16:26 pm »
I am having issues with slow speed on my wan interface. I have gigabit fiber, but my DL is only 50Mbit, with ~100Mbit upload. If I run iperf between a LAN PC and the OPNsense LAN interface, I get my 1Gb. If I run iperf from a machine directly connected to the "modem" to a public iperf server, I get pretty close to my 1Gb. If I run iperf from my OPNsense to a public iperf server, I get 50Mbit down, 120Mbit up.
I've googled a bunch, and made sure all the offloads are disabled, IPS/IDS are disabled. But I am not all that deep into actual system administration to know how to achieve the next bit, which seems to be to force my NICs away from the xn* to en1000 drivers.
How would I go about doing that? Any help is appreciated.
Logged
muchacha_grande
Full Member
Posts: 219
Karma: 19
Re: OPNsense 18.7.8 in VM on XCP-ng 7.5.1 ... slow throughput
«
Reply #1 on:
December 01, 2018, 04:00:43 am »
Just to test... try not using autonegotiation of speed and duplex on ports. Use fixed values.
Logged
kanstin
Newbie
Posts: 35
Karma: 6
Re: OPNsense 18.7.8 in VM on XCP-ng 7.5.1 ... slow throughput
«
Reply #2 on:
December 02, 2018, 05:36:03 am »
I think I did #6 on this page to get it working for me.
https://support.citrix.com/article/CTX212540
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
OPNsense 18.7.8 in VM on XCP-ng 7.5.1 ... slow throughput