Which partition to expand when moving to a larger drive?

[flyboy320]

I want to replace my aging SSD with a newer and larger one. I plan on using clonezille to make the image, but it has the option to expand the unused space in the newer larger drive to fill it up instead of leaving it empty. So I have 4 partitions for my OPNSense setup;
Partition 1 260MB vfat
Partition 2 512KB
Partition 3 51.4GB ufs
Partition 4 8GB

Which would be the correct one to make larger when cloning to the new drive?

[Patrick M. Hausen]

Reinstall with ZFS. It's in every conceivable way superior than UFS.

[Greg_E]

The longer answer:

Download (backup) the config file from the GUI. Might be a good idea to write down the installed packages and settings.

Shut it down, install the new drive, and reinstall OPNsense from scratch on the new drive (with ZFS). Use 2 drives if you want a mirror backup.

Log in, upload the config file, reboot. Log in and clean up the few things that might not have come back to life.

That's how I would handle it. More work? Yes probably.

[flyboy320]

Reinstall with ZFS. It's in every conceivable way superior than UFS.

The longer answer:

Download (backup) the config file from the GUI. Might be a good idea to write down the installed packages and settings.

Shut it down, install the new drive, and reinstall OPNsense from scratch on the new drive (with ZFS). Use 2 drives if you want a mirror backup.

Log in, upload the config file, reboot. Log in and clean up the few things that might not have come back to life.

That's how I would handle it. More work? Yes probably.

OK, I can take a hint! I'll reinstall and use ZFS this time.