UDP Broadcast Relay

[ntc4231g7]

thank for all information. ufabet com สมัครสมาชิก

[neuling10]

I use the UDP Broadcast Relay successfully for AirPrint and AirPlay - thank you very much for this very helpful plugin   :D

Unfortunately, I am unable to connect to my Somneo WakeUp Light using the Philips SleepMapper iOS app. Has anyone managed to set up VLAN broadcasting with the WakeUp Light?

[neuling10]

Another question: Is there any way to find out the required broadcast address and port?

My household devices also require multicast routing. mDNS and SSDP unfortunately doesn't work

[neuling10]

I use the UDP Broadcast Relay successfully for AirPrint and AirPlay - thank you very much for this very helpful plugin   :D

Unfortunately, I am unable to connect to my Somneo WakeUp Light using the Philips SleepMapper iOS app. Has anyone managed to set up VLAN broadcasting with the WakeUp Light?

Problem solved: A firewall rule was missing on LAN and VLAN net:
IPv4 ICMP   VLAN Netzwerk   *   Diese Firewall   *   *   *

[ooopppnnn]

Hey,

First thank you very much for the plugin!

I noticed that on your github you added support for --allowcidr and --blockcidr. Can I use it somehow with the opnsense plugin? I can't find them in the UI but maybe I can manually edit something to also add these?
Any plans on adding them to the plugin?

Thanks

[Onkel-tobi]

Hi all,

anyone who has airplay with Sonos running via udp broadcast relay?
For me it is not working.
A different device than Sonos (Denon) is working fine on the same plan, but with the Sonos its different.
I can see the device via airplay but connection is not possible.
Any hints? / anyone who has this running?

regards,
Tobias

[space_ranger]

Anyone know how to debug this not starting?

the error is

Code Select Expand

Notice root /usr/local/etc/rc.d/os-udpbroadcastrelay: WARNING: failed to start osudpbroadcastrelay

I've found a github thread saying wire guard was an issue but I don't use it. Other than that error I cant work out whats wrong.

Running     Opnsense 24.7.10_2 at present

[nolith]

Anyone know how to debug this not starting?

the error is

Code Select Expand

Notice root /usr/local/etc/rc.d/os-udpbroadcastrelay: WARNING: failed to start osudpbroadcastrelay
I've found a github thread saying wire guard was an issue but I don't use it. Other than that error I cant work out whats wrong.

Running     Opnsense 24.7.10_2 at present

I had the same problem, in my case I wanted to support mDNS on port 5353, but it was already occupied by Unbound because I run AdGuard on port 53.

I had to move Unbound to port 5354 and then I could start the relay

[xkpx]

Anyone know how to debug this not starting?

the error is

Code Select Expand

Notice root /usr/local/etc/rc.d/os-udpbroadcastrelay: WARNING: failed to start osudpbroadcastrelay
I've found a github thread saying wire guard was an issue but I don't use it. Other than that error I cant work out whats wrong.

Running     Opnsense 24.7.10_2 at present

I had the same problem, in my case I wanted to support mDNS on port 5353, but it was already occupied by Unbound because I run AdGuard on port 53.

I had to move Unbound to port 5354 and then I could start the relay

Same issue here but 5354 doesn't help either.

Code Select Expand

2024-12-31T19:43:13 Error configd.py [b8fe79e4-0d81-47ea-94b1-c43ffa3b6680] returned exit status 1
2024-12-31T19:43:13 Notice configd.py [b8fe79e4-0d81-47ea-94b1-c43ffa3b6680] starting udpbroadcastrelay instance