Issue with NAT Rule Description and "Default deny / state violation rule" Label

[oezay]

Hi everyone,

I have created a NAT rule, and it works as expected. However, in the live view, the allowed connections are displayed in green and marked as allowed, but they are labeled as "Default deny / state violation rule." Some connections are forwarded to the internal host but are still shown as blocked in the live log with the "Default deny / state violation rule" label.

I've noticed that if the initial incoming packets arrive on the primary WAN IP, the label remains blank. However, when packets come in on the virtual IP on the WAN interface, the "Default deny / state violation rule" label is applied.

Has anyone encountered this issue or know how to ensure that the correct description specified in the NAT rule is displayed in the live view? This behavior occurs both with associated rules and with explicitly created firewall rules.

Thank you for your support!
oezay

[guenti_r]

Sadly to say, i have the same issue but no solution.
The Firewall live view (Labels) are simply wrong displayed.