static Route

[pazhnik]

Hello.
How to write static route to opnsense?
config router 2
For network communication network 192.168.3.0/24 to 192.168.6.0/24

>>>>>>
192.168.3.0/24
router1
192.168.4.0/24
opnsense ( router2)
192.168.16.0/24
<<<<<<


I ping 192.168.6.200 my router1 with Src. address: 192.168.4.1.
But not ping 192.168.6.200 with Src. address: 192.168.3.1.
?

[bartjsmit]

System, Routes, All, Add Route

Bart...

[pazhnik]

thanks.
The result missed.

Code: [Select]

http://s9.picofile.com/file/8273459750/0.JPG
http://s9.picofile.com/file/8273459768/1.JPG
http://s8.picofile.com/file/8273459776/2.JPG
http://s8.picofile.com/file/8273459784/3.JPG

and
system 192.168.4.99  Connection  in 16.10
but 192.168.3.200 not Connection   16.10

[bartjsmit]

What about the static routes on router1?

Bart...

[pazhnik]

What about the static routes on router1?

Bart...

One route in a router1.
dst-address=192.168.16.0/24 gateway=192.168.4.32

>>>>>
Note:
other router instead router2 is: ok.
but router2: ofopnsense Not result.
<<<<

[bartjsmit]

Typo perhaps? You have .6 in your post from yesterday and .16 in your routing table.

If you're sure your routing is correct both ways, run traffic capture on OPNsense and ping both ways.

Bart...