Opensense sends all traffic over wireguard interface

[voidthewarranty]

I was following this video by Jim's Garage https://www.youtube.com/watch?v=UI5tO1hP2q8
to set up my wireguard instance.
After setting up the peer and linking it to the wireguard instance all ipv4 traffic starts being routed through that interface.
Firewall logs:
Without partner https://imgur.com/a/nYRAxtV
With partner https://imgur.com/a/DFsL6n6
Firewall Rules:
WAN https://imgur.com/a/T8LjSs2
LAN https://imgur.com/a/SyfT0rm
VPN https://imgur.com/a/tkRGDtH
VPN(group) https://imgur.com/a/Joy7SEo
Nat:
outbound https://imgur.com/a/9kCFT9H
portforward https://imgur.com/a/HOfh1j8
VPN config:
instance config https://imgur.com/a/0L5b2H2
peer config https://imgur.com/a/Ea8ACDf

I have dumped my config (and hopefully redacted it enough)
https://pastebin.com/RaNF3fUN

Any help is very appreciated

[DEC670airp414user]

this is expected.

if you didn't create
alias of the devices you want, or don't want to travel over the tunnel
then nat the devices you want to go over the tunnel and choosing the correct interface

https://docs.opnsense.org/manual/how-tos/wireguard-client.html
https://docs.opnsense.org/manual/how-tos/wireguard-client-mullvad.html
https://docs.opnsense.org/manual/how-tos/wireguard-client-proton.html
https://docs.opnsense.org/manual/how-tos/wireguard-selective-routing.html

[voidthewarranty]

Yeah, that would do it. I have since changed the allowed IPs value under peer to the tunnel network.

I am now facing a new issue. My phone will not connect even though:
1. the pubkeys are correct
2. the firewall has a rule set
3. the service is running

One strange thing that I have noticed is only the first udp request will apear in the firewall. Any subsequent handshake requests will not be reported in the log. I know the handshakes are being send because I can see the data sent number increasing.
Any ideas?