Plugging in port causes opnsense to freeze?

[DarkHelmet]

So I got my device yesterday.  Installed opnsense 22.7 straight away. Got things up and running with the default Lan/Wan ports active, updates applied etc..   tried to bridge ports 3-5 to the lan.  Got that working except if I plug anything into ports 3 - 5, opensense will/and freeze, requiring a hard power cord removal and reboot with the ports 3-5 empty.  What I mean by freeze is, I have the device connected to monitor/keyboard and it won't respond and no ports respond once something is plugged into ports 3-5.

Ports 0,1 and 2 work fine if I boot without anything connected to ports 3-5.

Could this possibly be an opnsense issue?  Or is my device defective or some bios setting not correct? 

I have an email to the amazon seller outstanding, but was wondering if this might be something of a known issue.

This is the device:

https://www.amazon.com/gp/product/B0B84T8VQR/

Thanks

[cookiemonster]

Double check you have the bridge as per the nuances of here https://docs.opnsense.org/manual/how-tos/lan_bridge.html . Hopefully just that and no hardware problem.

[DarkHelmet]

Double check you have the bridge as per the nuances of here https://docs.opnsense.org/manual/how-tos/lan_bridge.html . Hopefully just that and no hardware problem.

Yes, that's the guide I followed to setup the bridge.  ports 1 and 2 are working properly as part of the bridge.   Port zero is the wan.  I will go through and double check everything after work tho.   Thanks for the suggestion.