Wan failback seems not working

Started by nemesi, May 20, 2021, 11:03:27 AM

Previous topic - Next topic
Good morning everyone, thank you in advance for your help.
I'm trying to set up correctly multiwan on opnsense. Here the situation:

GATEWAY1:
Priority: 1
Weight: 1
Packet Loss thresholds: 30 to 40
Time Period: 300

GATEWAY2:
Priority: 2
Weight: 2
Packet Loss thresholds: 10 to 20
Time Period: 300

GATEWAY GROUP:
Gateway1: Tier1
Gateway2: Tier2
Trigger Level: Packet Loss

FIREWALL-SETTINGS-ADVANCED:
Multi-WAN   
- Sticky connections: disabled
- Shared forwarding: enabled
- Disable force gateway: disabled

Basically the failover works great and as soon as there is packet loss in the gateway1 .. the connection is switched to the gateway2. The problem is that after gateway1 is back to normal ... the failback is not working. Even after 1 day, opnsense is still using the gateway2 insted of going back to gateway1.

Is there anything I'm missing?
Thank you so much for your help.
RZ.

just add another getaway group set it up as
first wan tier 2
second wan tier 1

I am having this exact same issue. WAN will failover to WAN2 successfully but never (or takes forever) to failback to WAN.

I don't see how adding another gateway group would help as that would need to be specified in the firewall some how for the policy based routing and you can only select one gateway / gateway group.