OpenVPN-AS: Advanced options

[TrueType]

Hey,

I put the command "push "route 192.168.1.0 255.255.255.0"" in my "Advanced" options box in the OpenVPN Access Server in order to reach my clients from LAN and vice versa. But it says under the Advanced box that it is going to be removed in the future? (Full message below) Can I get the same result another (read better) way? :)

Code Select Expand

This option will be removed in the future due to being insecure by nature. In the mean time only full administrators are allowed to change this setting.

[ManBat]

Just giving this topic a nudge,

I have exactly the same issue, it looks like the IP V/4 local network box doesn't do what you want it to

[mimugmail]

Why shouldnt't routes get pushed? Can you show screenshots please

[ManBat]

Hey,

I don't know why they don't but: https://forum.opnsense.org/index.php?topic=26447.0

Explains what I've observed.

Plan today is to redo my tests and check the client route tables.

Cheers,
MMB

[mimugmail]

If you want to push routes and use "Remote Access XX" as server mode, dont forget to add client specific overrides for usernames, otherwise routes don't get pushed.

[ManBat]

ahhh, ok, the road warrior VPN setup configuration should reference this as my following the guide is probably pretty typical.

[mimugmail]

Roaswarriors usually dont have routed networks behind :)
But Docs always needs some love

[ManBat]

Well I dunno, I mean presumably the reason for using the VPN in the common case is to get to the network on the inside.