Default LAN Interface Config Question

[spetrillo]

My LAN interface is 192.168.1.0/24. Can I also configure it for a vlan on another subnet? Is this doable?

[Matriciel]

Another subnet, i don't know, but Vlan yes. This in interface section

[Greelan]

Interfaces - Other Types - VLAN: create VLAN
Interfaces - Assignments: assign VLAN interface
Interfaces - [VLAN NAME]: set up subnet etc

You will also need to create required firewall rules to allow traffic in/out

Google "OPNsense VLANs", plenty of guides out there

[spetrillo]

Another subnet, i don't know, but Vlan yes. This in interface section

Yes I am trying to determine if I can have a vlan on the same default LAN interface, but on a different subnet. For example:

Default LAN Interface(IGB1): configured for 192.168.1.0/24
VLAN 1(IGB1): configured for 192.168.0.0/24

I dont want to make any changes until someone can confirm this will work or will not work.

[banym]

Yes you could use multiple VLANs on one interface with multiple subnets. That is what VLANs are for.

You will need a VLAN capabal switch or hardware to make us of it.