Author Topic: L2TP Plugin (Read 16366 times)

pcampbell · « **Reply #15 on:** November 14, 2020, 04:39:17 am »

Ok. I have to say thank you for all of your help. Last thing I have done is change the Local Network address in the Tunnel Phase 2 to 0.0.0.0/0 and it is all finally routing properly. LAN items to to LAN and I have internet access through the Tunnel.
Again, thanks for all of your help.

pcampbell · « **Reply #16 on:** November 14, 2020, 01:31:54 pm »

Ok, may have spoke too soon $:-\$ While I can see my network and do some things (ping several devices and access some machines) I cannot use Remote Desktop (RDP) to connect to my server. I can ping the server by DNS name and by IP, but not RDP into it. Thoughts?

mimugmail · « **Reply #17 on:** November 14, 2020, 01:58:05 pm »

Windows Firewall disabled?

pcampbell · « **Reply #18 on:** November 14, 2020, 05:57:50 pm »

Have never had to turn it off before, but did and still no luck.

mimugmail · « **Reply #19 on:** November 14, 2020, 06:38:15 pm »

Then do a Packet capture on LAN Interface for Port 3389 and check If you see something

pcampbell · « **Reply #20 on:** November 16, 2020, 03:17:40 am »

Here you go. It appears to be passing traffic (from what I can see). But it never finishes loading the Remote Desktop into the server or a desktop I tried as well.

Thanks
Philip

Jhjacobs81 · « **Reply #21 on:** November 23, 2020, 08:55:54 am »

never mind, wrong post here!

pcampbell · « **Reply #22 on:** November 25, 2020, 03:20:46 am »

After much trial and testing, I've come to the determination that the cause of my issue stems around something in the Interface Scrub. If I disable that RDP works fine. If it's on I cannot get it to work properly. I've tried setting an individual setting for the IPsec interface and if I change the Max MSS to 2400 it will allow me to connect to one of my servers. If it try a desktop it will not work. If I change it to 2500 I can connect to the desktop but then I cannot connect to the Server. I have tried different combinations of settings and not made any progress. As I say though, just turning off the Interface Scrub works, so I guess I'll leave it at that.

Thanks to all who helped
Philip Campbell

Jhjacobs81 · « **Reply #23 on:** December 02, 2020, 12:20:02 pm »

i managed to get it working with help from deciso support, i believe there are some steps missing in the manual.. but ofcourse i cant remember what they did.. let me get back to you later on!

One thing had to do with the NAT settings, i remember that clearly

Author Topic: L2TP Plugin (Read 16366 times)

pcampbell

Re: L2TP Plugin

pcampbell

Re: L2TP Plugin

mimugmail

Re: L2TP Plugin

pcampbell

Re: L2TP Plugin

mimugmail

Re: L2TP Plugin

pcampbell

Re: L2TP Plugin

Jhjacobs81

Re: L2TP Plugin

pcampbell

[SOLVED] L2TP Plugin

Jhjacobs81

Re: L2TP Plugin