Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
20.7 Legacy Series
»
[Solved] Bridge isn't passing traffic between physical ports
« previous
next »
Print
Pages: [
1
]
Author
Topic: [Solved] Bridge isn't passing traffic between physical ports (Read 3350 times)
bobpaul
Newbie
Posts: 12
Karma: 4
[Solved] Bridge isn't passing traffic between physical ports
«
on:
August 10, 2020, 05:47:41 am »
I followed the guide for
Bridged LAN
and it appeared to work, but it turns out it's only half working.
I have igb0 set as WAN, bridge0 set as LAN. Bridge0 contains igb1, igb2, and igb3 (though only igb2 and 3 are plugged in).
All connected links can talk to the router; DHCP works, hosts have internet access, etc. But hosts on igb2 can't talk to hosts on igb3.
Any suggestions on how to proceed?
«
Last Edit: August 11, 2020, 01:50:52 am by bobpaul
»
Logged
bobpaul
Newbie
Posts: 12
Karma: 4
Re: [Solved] Bridge isn't passing traffic between physical ports
«
Reply #1 on:
August 11, 2020, 02:01:35 am »
Derp, ok. I'm dumb.
Today I noticed in
FreeBSD's handbook
that bridges are affected by the packet filter. Specifically, pf treats packets flowing through the bridge as entering the physical port, not the bridge port. So for each interface, I added a Firewall Rule to OPNsense for "for this interface with source LAN NET and destination LAN NET, pass". And it worked!
So then I looked back at the guide and
Step 6 is setup tunables so pf filters based on the bridge rather than the member ports
.
So if anyone else has this problem... either add explicit firewall rules, or follow all the steps in the guide >_<
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
20.7 Legacy Series
»
[Solved] Bridge isn't passing traffic between physical ports