[SOLVED] Install via SSH (nano deployment)

[Spirit]

Hi,

i have i uses Cyberroam Firewall (600MhZ/512MB RAM/SSD 128GB) enhances RAM to 1GB for installation.
I could not use other deploment process as nano, as i was not able to boot from anything else.
So i preinstalled the nano image on the 128GB SSD.

Firewall ist running fine but only on the 4GB Partition.

Whould like to run the installation on the disk.
I managed to activate the SSH via GUI but i can not login by the installer, root ist possible but there ist no installer option.

Thanks for any Help

[franco]

Hi Spirit,

The Nano image is not an installer per se. It has a partition grow feature, you flash it to a card or disk and boot it and it's ready to be used... But you can still use the installer (all the time):

# opnsense-installer

But since Nano is not a traditional install media, you can't automatically access the installer via SSH user "installer" on boot, you need to grant root access to SSH and go from there.


Cheers,
Franco

[Spirit]

Even it is late, thanks for the hint.
Two boxes working right now

[franco]

Sounds good. 8)


Cheers,
Franco