[SOLVED] WebGUI - Can't access

[iNveiN]

Hi all,

I'm new to OPNsense, only just downloaded today!

basically, I have it installed on a physical server but I can't seem to access the WebGUI. I type 192.168.1.1 into my browser and it just says "This site cannot be reached"

I have tried with different browsers and still the same issue. I can ping the server and the server can ping my PC, if I do a tracert to google it shows that it is going through 192.168.1.1 then to my router and out

Any ideas?

Thanks

[bartjsmit]

What is the subnet and netmask for your PC and OPNsense?

Have you updated OPNsense from its console?

Bart...

[franco]

I think you may be looking at not having "LAN" correctly connected. If you use e.g. a laptop, the port will give you a 192.168.1.0/24 address, likely 192.168.1.100. If not, there is no use trying to reach 192.168.1.1.

Try all ports, see where it matches. :)

[iNveiN]

@bartjsmit

I will get that information when I'm next home

@franco

When my PC is connected it gets a 192.168.1.101 IP address. Before the firewall was put between it my PC had an IP of 192.168.0.10.. so I'm guessing it is correctly connected?

Thanks

[franco]

That doesn't sound wrong. Can you ping 192.168.1.1?

Try these two addresses:

https://192.168.1.1/

http://192.168.1.1/

[iNveiN]

Franco,

Yes I tried using both of those address' already, I can also ping 192.168.1.1 without a problem

[franco]

Which browser do you use? Try a recent Firefox/Chrome to double-check.

[iNveiN]

Just tried Firefox, same error message as Chrome and Internet Explorer

[iNveiN]

I've managed to get it working, had to set static IPs etc to get it to connect, seems odd though

[franco]

Ok, glad to hear. :)


Cheers,
Franco