Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
General Discussion
»
How to reinstall missing Adguard plugin / connectivity issues
« previous
next »
Print
Pages: [
1
]
Author
Topic: How to reinstall missing Adguard plugin / connectivity issues (Read 661 times)
P195
Newbie
Posts: 36
Karma: 0
OPNsense beginner for home network
How to reinstall missing Adguard plugin / connectivity issues
«
on:
May 18, 2024, 03:31:29 pm »
Hi All,
- Original install had AdguardHome plugin installed
- Made a backup
- Updated to 24.1.7 (new install over old install) configured same interfaces and IP's
- Restored backup
- Couldn't load any websites
- Realised that os-adguardhome-maxit plugin is missing (shown in red)
- Went to Sevices > UnboundDNS > DNS over TLS and checked "Use System Nameservers"
- Went to System > Settings > General and added DNS Server 8.8.8.8 (use gateway = none)
- Can now load websites
I want to reinstall the AdguardHome plugin so my original configuration with AdgaurdHome resumes:
- Used Putty to SSH into OPNsense firewall
- using this guide:
https://0x2142.com/how-to-set-up-adguard-on-opnsense/
typed the fetch command to install the adguard plugin and got these results:
fetch -o /usr/local/etc/pkg/repos/mimugmail.conf
https://www.routerperformance.net/mimugmail.conf
fetch: /usr/local/etc/pkg/repos/mimugmail.conf: open(): Permission denied
pkg update
pkg: Insufficient privileges to update the repository catalogue.
- Went to System > Firmware > Status and ran connectivity audit and got these results:
--- 89.149.222.99 ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 11.693/11.879/12.094/0.149 ms
Checking connectivity for repository (IPv4):
https://pkg.opnsense.org/FreeBSD:13:amd64/24.1
Updating OPNsense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries: .......... done
OPNsense repository update completed. 841 packages processed.
All repositories are up to date.
Checking connectivity for host: pkg.opnsense.org -> 2001:1af8:5300:a010:1::1
ping:
UDP connect: No route to host
Checking connectivity for repository (IPv6):
https://pkg.opnsense.org/FreeBSD:13:amd64/24.1
Updating OPNsense repository catalogue...
pkg:
https://pkg.opnsense.org/FreeBSD:13:amd64/24.1/latest/meta.txz
:
Non-recoverable resolver failure repository OPNsense has no meta file, using default settings
pkg:
https://pkg.opnsense.org/FreeBSD:13:amd64/24.1/latest/packagesite.pkg
: Non-recoverable resolver failure
pkg:
https://pkg.opnsense.org/FreeBSD:13:amd64/24.1/latest/packagesite.txz
: Non-recoverable resolver failure
Unable to update repository OPNsense
Error updating repositories!
***DONE***
How I go about resolving the connectivity issues found during the audit?
How do I reinstall the missing Adguard plugin (and why I cant fetch the plugin config file?)
Many Thanks,
P195
Logged
cookiemonster
Hero Member
Posts: 1823
Karma: 95
Re: How to reinstall missing Adguard plugin / connectivity issues
«
Reply #1 on:
May 18, 2024, 11:43:38 pm »
you need to sudo when issuing that fetch because the location where the file is being saved is privileged.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
General Discussion
»
How to reinstall missing Adguard plugin / connectivity issues