24.1.2_1 Problems only

Started by 0zzy, March 01, 2024, 08:21:22 AM

Previous topic - Next topic
Good morning,
After my Sense had been running error-free for quite a while, nothing worked at all after the update.

All errors occur after the Protectli is restarted.

Following after restart:

- no longer connected to the internet,
- any mimugmail plugins are shown as orphaned after restart, none of the plugins works anymore,
- dnscrypt proxy refuses to work,
- dyndns plugin is declared as incorrectly configured,
- Updates stop with the error message that the certificate doesn't work,

If I then remove all mimugmail plugins, delete the repo using the shell, then enter an address in the settings under DNS, the update will run.
Afterwards I can reinstall mimugmail plugins.

Until the restart everything is fine, only after the restart nothing works again.

What options do I have to solve the problems here?

I've reinstalled and reconfigured it a few times in the meantime.
Protectli FW4B
Intel J6412 4 cores
4x Intel I225-V 2,5 Gbit/s
16 GB memory
480 GB m.2 SATA SSD storage
Coreboot

Now everything works fine again.

I now even have the faulty plugins running again, but I would now like to find out what the problem was.
The errors are incomprehensible to me because I hadn't changed anything.

The only thing that happened on the network side was that my ISP had installed an update on the Fritzbox and the bridge mode was missing for a while.

Can this lead to the scythe basically having a total failure?
Protectli FW4B
Intel J6412 4 cores
4x Intel I225-V 2,5 Gbit/s
16 GB memory
480 GB m.2 SATA SSD storage
Coreboot