Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
General Discussion
»
Networking noob looking for help to build a vpn server
« previous
next »
Print
Pages: [
1
]
Author
Topic: Networking noob looking for help to build a vpn server (Read 671 times)
Amd7674
Newbie
Posts: 4
Karma: 0
Networking noob looking for help to build a vpn server
«
on:
February 08, 2024, 12:23:02 am »
Hi,
I'm it guy and I've building my own PCs for me and my family for the last 30yrs. However, networking has never been my strongest suite. I can get by, but it is always a struggle. I can follow a guide but I always run into issues. For my home network I'm currently using 3 x 6 pro eeros . I've set it up about 3yrs ago and I'm happy overall.
Recently I was thinking about purchasing a cheap vpn router and use it with Surfshark. So I came across an idea to use OPNsense (and help from their great community) to build vpn WireGuard router and perhaps later a full blown (dhcp, firewall etc) router and put my 6 pro eeros in a bridge mode as APs for wifi. This project should (I hope) also help me to learn more about networking ( my Achilles heel) .
I currently have 4/5 functioning old win10 PCs and Unused 5 gigabit 5 port unmanaged switch. My preference would be to play with my retired hardware without interrupting local network. Later i don't mind paying for a multiple nic card if everything is working properly.
In the next few days I will try to gather my old PCs specs , CPU, Ram size, Nic card brand and hopefully you will help me to pick best one for this project :-)
First I would like to attempt to build a vpn WireGuard router that I can plug it in into my existing network and be able to have any device on my network to use WireGuard vpn as client.
For this do I need a PC with 2 Ethernet ports/nics or one would be sufficient ? Any beginner setup guides to help me going?
Any help would be greatly appreciated and thank you in advance for your help!!!
Logged
Amd7674
Newbie
Posts: 4
Karma: 0
Re: Networking noob looking for help to build a vpn server
«
Reply #1 on:
February 10, 2024, 09:05:21 pm »
The two PCs I can use are:
CPU Intel Pentium G4500 @ 3.50GHz
RAM 8GB DDR 1066 Mhz
Intel Ethernet I219-V
CPU Intel i3450 @ 3.10Ghz
RAM 8GB DDR3 1600 Mhz
Realtek controller 8111f controller <- is this nic supported?
I believe older i3450 ivybridge is about 10% faster. Would either system be able to do vpn wireguard?
Also do I need second nic card?
«
Last Edit: February 10, 2024, 09:10:36 pm by Amd7674
»
Logged
Amd7674
Newbie
Posts: 4
Karma: 0
Re: Networking noob looking for help to build a vpn server
«
Reply #2 on:
February 11, 2024, 08:18:07 pm »
Anyone?
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
General Discussion
»
Networking noob looking for help to build a vpn server