Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
23.7 Legacy Series
»
Sh*t speeds with vanilla opnsense install need direction
« previous
next »
Print
Pages: [
1
]
Author
Topic: Sh*t speeds with vanilla opnsense install need direction (Read 366 times)
mscaffa
Newbie
Posts: 3
Karma: 1
Sh*t speeds with vanilla opnsense install need direction
«
on:
December 04, 2023, 01:21:42 am »
Looking for some direction purchased this off Amazon AWOW Mini PC Dual 2.5gb NIC 256GB SSD 8GB DDR4, Intel N5105 Mini Computer. Installed opsense ran through the wizard. No extra rules nothing. Pay for 500 up and down fiber frontier. Speed test on the firewall get 6 down. After messing with tunables. Get 20 down and 500 up. Can't figure out why
Any direction would be appreciated
Already disabled hardware checksum offload Created a vlan and added a parent to the wan port in interfaces
Connected on my wifi with my phone through Nord VPN get normal speed for WiFi
Thanks !
installed the realtek drivers through the plugins same thing.
igc0@pci0:1:0:0: class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x15f3 subvendor=0x8086 subdevice=0x0000
vendor = 'Intel Corporation'
device = 'Ethernet Controller I225-V'
class = network
subclass = ethernet
cap 01[40] = powerspec 3 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 11[70] = MSI-X supports 5 messages, enabled
Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR RO NS
max read 512
link x1(x1) speed 5.0(5.0) ASPM disabled(L1)
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0003[140] = Serial 1 00e04cffff6f1109
ecap 0018[1c0] = LTR 1
ecap 001f[1f0] = Precision Time Measurement 1
ecap 001e[1e0] = L1 PM Substates 1
igc1@pci0:2:0:0: class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x15f3 subvendor=0x8086 subdevice=0x0000
vendor = 'Intel Corporation'
device = 'Ethernet Controller I225-V'
class = network
subclass = ethernet
cap 01[40] = powerspec 3 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 11[70] = MSI-X supports 5 messages, enabled
Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR RO NS
max read 512
link x1(x1) speed 5.0(5.0) ASPM disabled(L1)
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0003[140] = Serial 1 00e04cffff6f110a
ecap 0018[1c0] = LTR 1
ecap 001f[1f0] = Precision Time Measurement 1
ecap 001e[1e0] = L1 PM Substates 1
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
23.7 Legacy Series
»
Sh*t speeds with vanilla opnsense install need direction