PPPoE dialed nicht

[skotti]

Hallo,
nach mehreren pfsense-Installationen möchte ich nun die erste opnsense in Betrieb nehmen.
Leider kriege ich die Einwahl mittels PPPoE nicht zum laufen. Ich kann nirgendwo einen
Einwahlversuch erkennen.

Code: [Select]

# ps auxww | grep mpd
root   13570   0.0  0.1  50300  5460  -  Ss    9:57AM  0:00.04 /usr/local/sbin/mpd5 -b -k -d /var/etc -f mpd_wan.conf -p /var/run/pppoe_wan.pid -s ppp pppoeclient

# cat /var/etc/mpd_wan.conf
startup:
  # configure the console
  set console close
  # configure the web server
  set web close

default:
pppoeclient:
  create bundle static wan
  set bundle enable ipv6cp
  set iface name pppoe0
  set iface route default
  set iface disable on-demand
  set iface idle 0
  set iface enable tcpmssfix
  set iface up-script /usr/local/sbin/ppp-linkup
  set iface down-script /usr/local/sbin/ppp-linkdown
  set ipcp ranges 0.0.0.0/0 0.0.0.0/0
  set ipcp enable req-pri-dns
  set ipcp enable req-sec-dns
  create link static wan_link0 pppoe
  set link action bundle wan
  set link disable multilink
  set link keep-alive 10 60
  set link max-redial 0
  set link disable chap pap
  set link accept chap pap eap
  set link disable incoming
  set link mtu 1492
  set auth authname "bnutzer@domain"
  set auth password strenggeheim
  set pppoe service "wf1"
  set pppoe iface igb0
        open

# ifconfig igb0
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=400bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO>
        ether 0c:c4:7a:7b:8f:b4
        inet6 fe80::ec4:7aff:fe7b:8fb4%igb0 prefixlen 64 scopeid 0x1
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active


# grep ppp /var/log/system.log
Sep 13 08:58:36 wsf opnsense: /interfaces.php: The command `/sbin/ifconfig 'pppoe0'' failed to execute
Sep 13 08:58:36 wsf opnsense: /interfaces.php: The command '/sbin/ifconfig 'pppoe0' inet6 -accept_rtadv' returned exit code '1', the output was 'ifconfig: interface pppoe0 does not exist'
Sep 13 08:58:36 wsf kernel: ng0: changing name to 'pppoe0'
Sep 13 09:55:22 wsf opnsense: /interfaces.php: The command `/sbin/ifconfig 'pppoe0'' failed to execute
Sep 13 09:55:22 wsf opnsense: /interfaces.php: The command '/sbin/ifconfig 'pppoe0' inet6 -accept_rtadv' returned exit code '1', the output was 'ifconfig: interface pppoe0 does not exist'
Sep 13 09:55:22 wsf kernel: ng0: changing name to 'pppoe0'
Sep 13 09:55:24 wsf opnsense: /interfaces.php: The command '/sbin/ifconfig 'pppoe0' -staticarp' returned exit code '1', the output was 'ifconfig: interface pppoe0 does not exist'
Sep 13 09:55:24 wsf opnsense: /interfaces.php: The command '/usr/sbin/arp -d -i 'pppoe0'  -a > /dev/null 2>&1' returned exit code '1', the output was ''
Sep 13 09:55:26 wsf opnsense: /usr/local/etc/rc.linkup: The command `/sbin/ifconfig 'pppoe0'' failed to execute
Sep 13 09:55:26 wsf opnsense: /usr/local/etc/rc.linkup: The command '/sbin/ifconfig 'pppoe0' inet6 -accept_rtadv' returned exit code '1', the output was 'ifconfig: interface pppoe0 does not exist'
Sep 13 09:55:27 wsf kernel: ng0: changing name to 'pppoe0'
Sep 13 09:57:50 wsf opnsense: /usr/local/etc/rc.bootup: The command '/sbin/ifconfig 'pppoe0' inet6 -accept_rtadv' returned exit code '1', the output was 'ifconfig: interface pppoe0 does not exist'
Sep 13 09:57:50 wsf kernel: starting pppoe0 link...
Sep 13 09:57:50 wsf kernel: ng0: changing name to 'pppoe0'

# ifconfig pppoe0
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1500
        inet6 fe80::ec4:7aff:fe7b:8fb4%pppoe0 prefixlen 64 scopeid 0x9
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>


Haben die Fehlermeldungen in Bezug auf das Interface pppoe0 eine Bedeutung?
Bin ziemlich ratlos.

Grüße,
Skotti.

[skotti]

Ich hab' eben mal eine OpenWRT-Kiste zu Testzwecken an den Zugang
gesteckt - die Einwahl per PPPoE ging auf Anhieb.
Scheint danach am opnsense zu liegen.

Grüße, Skotti.

[skotti]

Ein Reset auf Factory-Defaults und eine anschliessende Neukonfiguration
hat das Problem gelöst.