Epson WF2880 sharing on different LAN networks

[snippem]

Hi all,

I have a printer that i want to share that is on LAN 2 and i want to share it on all of my other lan networks.
Firewall rules are basic:
LAN 2 is a separate network for IOT and guests and that is where the printer is located.
Traffic is blocked here to all secure networks so devices cannot communicate to lan 1 and 3.
LAN 1 and 3 aloows acces to all interfaces so i can connect to devices that are on LAN 2.
On wifi and on a wired interface i can connect to the web interface of the printer on 192.168.3.15.
But the printer cannot be used to print.
Do i need to setup some firewall rule to make printing posible from LAN 1 and 3?

[snippem]

Well after some more testing I found out disabling igmp snooping on all network equipment everything works as expected.
From there I tested further and found out enabling the setting  Validate IGMPv3 IP Header on my Netgear managed switches helped. Do not know why but even after several reboots etc. The printer is recognized and installed and prints fine and no side effects lol. If anybody knows what the setting Validate IGMPv3 IP Header does let me know :-)

Verstuurd vanaf mijn CPH2449 met Tapatalk