How to create a test network with VMWARE

[iamr00t]

Hello,

Anyone could help me how to build a test network with vmware, currently i already set up opnsense and 1 client "windows 7" the problem is i coudnt connect the client to get the ip address from opnsense.

Thanks,
iamR00T

[weust]

Do you want a network with only VM's for testing purposes?
The default OPNsense LAN address is 192.168.1.1, as mentioned when booting the first time after installation, and every reboot.

[fabian]

The OPNsense VM and your client must be in the same network - maybe you have to adjust the adapter settings.

[iamr00t]

Do you want a network with only VM's for testing purposes?
The default OPNsense LAN address is 192.168.1.1, as mentioned when booting the first time after installation, and every reboot.

yes only for testing in VM... i know the default ip address opnsense, but how do i configure the vmware to be able to connect the firewall and client

[iamr00t]

The OPNsense VM and your client must be in the same network - maybe you have to adjust the adapter settings.

Please tell me how? :)

[klausneil]

You try with the Virtual Network Editor and configure for NAT in Change Settings options and late configure the ip and dhcp, you can use you eth0 (wan) bridge, eth1 (lan) nat and client winxp in nat. please tell me if this work