PiVPN behind OPNsense

[seki]

Hi Lovely People!

Please enlighten (or drag away) me from the following idea.

I would like to set up a PiVPN on my RPi4B.8 and it would be placed behind OPNsense. Something like that:

ISP router ---> OPNsense ---> Cisco switch ---> RPi with PiVPN


Is it possible? Is it actually worth it? If yes then can someone enlighten me and provide me some keywords that I can search in Google cause when I use "PiVPN" or "VPN" along with OPNsense or pfSense I get lots of tutorials that are guiding me through installation and stuff like that. I already done that. The problem is that it seems that I can't reach my PiVPN from outside. Maybe I'm doing something wrong?

Now... For those that ask me why I did not set up OpenVPN on OPNsense.
Well I would like to add a few things on this PiVPN machine and I want to keep my OPN clean and light as much as possible.

[chemlud]

Hi!

Do you have a public IP on WAN of the opnsense? So is the provider router bridged?

What do you want to achieve? Mobile phones and/or other mobile devices can connect to your pi? Or connect the pi to another VPN server (other location)?

[seki]

Hi chemlud and thank you for your response.

My ISP router has one particular IP set as DMZ and that DMZed IP is my OPNsense's WAN IP. Plus I have CFlare set up as my DynDNS service (see attached screen)


Yes I want to be able to connect from all over the world using OpenVPN App/Client to my PiVPN inside house to grab some data from my NAS at home.

[chemlud]

Do you have a port forward from the WAN of ISP router to the opnsense? Or are all ports of the opnsense exposed (DMZ)?

Do you have a FW rule in place on WAN of the opnsense for the port/protocol of choice for your tunnel?

Have you configured openVPN or wireguard on the pi?

[seki]

For the time being I have just one rule on WAN interface:

Proto: IPv4
Source/Dest/Port/anything else: *

I'll narrow this rule later once I set it up.


As for ISP router DMZ exposes everything, even ports. This devices is basically naked to the world. However I've set up port forwarding for VPN access (1195 - yes, it's not 1194):

Inside port: 1195
Outside: port: 1195
Proto: TCP/UDP
Device: 192.168.5.200 (the IP of OPNsense WAN link that is DMZed)

[chemlud]

1195, so it's openVPN?

Port forward for 1195 on opnsense to IP of the pi?

What do you see on the client? What's in the logs of your pi?

Start a package capture on the WAN of your opnsense port 1195 for ipv4 and see if anything arrives there...

[seki]

Yes. PiVPN is OpenVPN based.

Port forward done on WAN interface that redirects to PiVPN's IP at port 1195

On the client side I do get timeouts not sure where I should put my focus. Whether it's ISP's router or OPNsense

Code: [Select]

15:04:28.828 -- Connecting to [vpn.xxxxx.it]:1195 (8x.xxx.xxx.182) via UDPv4
15:04:38.798 -- Server poll timeout, trying next remote entry...
15:04:38.798 -- EVENT: RECONNECTING
15:04:38.800 -- EVENT: RESOLVE
15:04:38.808 -- Contacting 8x.xxx.xxx.182:1195 via UDP
15:04:38.808 -- EVENT: WAIT
15:04:38.811 -- Connecting to [vpn.xxxxx.it]:1195 (8x.xxx.xxx.182) via UDPv4
15:04:48.801 -- Server poll timeout, trying next remote entry...

And yes - vpn.xxxxx.it is a CNAME in Cloudflare DNS that points to fw.xxxx.it which is dynamically updated by DynDNS client on OPNsense

[chemlud]

Do a package capture on WAN for port 1195... It's under Interfaces -> Diagnostics

[seki]

Looks like it's grabbing something.

The IP 8x.xxx.xxx.182 is my actual public IP

WAN re0   15:24:16.042842 IP 8x.xxx.xxx.182.43069 > 192.168.5.200.1195: UDP, length 54 WAN re0   15:24:17.014133 IP 8x.xxx.xxx.182.43069 > 192.168.5.200.1195: UDP, length 54 WAN re0   15:24:18.019354 IP 8x.xxx.xxx.182.43069 > 192.168.5.200.1195: UDP, length 54

The packet capture on the LAN interface is empty though

[seki]

chemlud!

As usual I've done something stupid... This time I screwed up Port Forward. The source interface was not WAN but LAN

I apologize for my stupidity but your troubleshooting session was very helpful and now I know more how to dig for more when t-shooting cases like this.