Author Topic: I have two sites with IPsec tunnel… only one Phase II LAN works (Read 845 times)

ao · « **on:** March 27, 2023, 03:47:17 pm »

1. I have two sites with IPsec tunnel… one LAN works both ways, but additional LANs do not - thet are configured as per attachment.

ao · « **Reply #1 on:** March 27, 2023, 03:48:51 pm »

While three LANs configured for Phase II - only one LAN works ... (see attachement)

ao · « **Reply #2 on:** March 27, 2023, 03:50:19 pm »

3. The Phase 1 seems to work fine ... (see attached)

ao · « **Reply #3 on:** March 27, 2023, 03:52:55 pm »

Phase II seems to setup routes OK ...
Phase II seems to setup security Policy DB OK ...
The IP Secs firewalls are open ...
Nothing obvious in log files ...

Looking for advice on where to look next please

Patrick M. Hausen · « **Reply #4 on:** March 27, 2023, 03:58:13 pm »

The other side has all three networks as local? Have you tried enabling tunnel isolation?

ao · « **Reply #5 on:** April 11, 2023, 01:36:27 pm »

Thank You - I finally got help - it is not obvious but need to have matching rule on each end for reverse route ...

Patrick M. Hausen · « **Reply #6 on:** April 11, 2023, 01:55:19 pm »

This is obvious

In a static tunnel setup all participating sites need full information. Unless default routes/SAs are in place, of course.

Glad you got it working.

Author Topic: I have two sites with IPsec tunnel… only one Phase II LAN works (Read 845 times)

ao

I have two sites with IPsec tunnel… only one Phase II LAN works

ao

Re: I have two sites with IPsec tunnel… only one Phase II LAN works

ao

Re: I have two sites with IPsec tunnel… only one Phase II LAN works

ao

Re: I have two sites with IPsec tunnel… only one Phase II LAN works

Patrick M. Hausen

Re: I have two sites with IPsec tunnel… only one Phase II LAN works

ao

Re: I have two sites with IPsec tunnel… only one Phase II LAN works

Patrick M. Hausen

Re: I have two sites with IPsec tunnel… only one Phase II LAN works