Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
Advide for GBIC on DEC3860
« previous
next »
Print
Pages: [
1
]
Author
Topic: Advide for GBIC on DEC3860 (Read 4674 times)
Mbl
Jr. Member
Posts: 78
Karma: 6
Advide for GBIC on DEC3860
«
on:
March 19, 2021, 08:12:16 pm »
Hi all
I‘m new to OPNsense and was using Unifi for a long time now. I have just received my brand new DEC3860 hardware today and moved all the vlans over. My internet access is running on a 1 Gb fiber link connected over a siligence sga 441sfpo-1gb GBIC module. Connecting the existing GBIC and fiber to the ax0 port (i have VLAN 10 set on it) the ports status stays „no carrier“. Connecting everything back to Unifi it works as before.
Did had anybody the same issue? Btw. I‘m connecting to a Swisscom (wingo) fiber here in switzerland
On /var/log/system.log I can see that the SFP+ port ist recognized:
Jan 29 06:34:36 OPNsense kernel: ax0: <AMD 10 Gigabit Ethernet Driver> mem 0x80160000-0x8017ffff,0x80140000-0x8015ffff,0x80188000-0x80189fff at device 0.4 on pci6
As it looks like the GBIC is not recognized:
root@firewall:~ # ifconfig -vvvm ax0
ax0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=800028<VLAN_MTU,JUMBO_MTU>
capabilities=f503bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWFILTER,VLAN_HWTSO,NETMAP,RXCSUM_IPV6,TXCSUM_IPV6>
ether f4:90:ea:00:60:a1
inet6 fe80::f690:eaff:fe00:60a1%ax0 prefixlen 64 scopeid 0x5
media: Ethernet autoselect
status: no carrier
supported media:
media autoselect
media 100M-SGMII
media 100baseTX
media 1000Base-SGMII
media 1000baseT
media 1000baseSX
media 1000baseLX
media 1000baseCX
media 1000Base-KX
media 10GBase-SFI
media 10Gbase-T
media 10GBase-KR
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@firewall:~ #
root@firewall:~ # ifconfig -vvvm ax0_vlan10
ax0_vlan10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
capabilities=600303<RXCSUM,TXCSUM,TSO4,TSO6,RXCSUM_IPV6,TXCSUM_IPV6>
ether f4:90:ea:00:60:a1
inet6 fe80::f690:eaff:fe00:60a1%ax0_vlan10 prefixlen 64 scopeid 0xc
groups: vlan
vlan: 10 vlanpcp: 0 parent interface: ax0
media: Ethernet autoselect
status: no carrier
supported media:
media autoselect
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@firewall:~ #
Checking a clean /var/log/system.log on interface (ax0) messages i get the following:
Jan 29 10:51:20 firewall kernel: ax0: __xgbe_phy_config_aneg: fix conf fail -22
Jan 29 10:51:20 firewall kernel: ax0: __xgbe_phy_config_aneg: set_mode 1 AN int reg value 0x370f000 ret value -22
Jan 29 10:51:20 firewall kernel: ax0: xgbe_phy_start: phy_config_aneg -22
Jan 29 10:51:20 firewall kernel: ax0: axgbe_pci_init: phy start -22
Jan 29 10:51:21 firewall kernel: ax0: SPH Enabled
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 0
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 1
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 2
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 3
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 4
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 5
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 6
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 7
Jan 29 10:51:21 firewall kernel: ax0: RSS Enabled
Jan 29 10:51:21 firewall kernel: ax0: Receive checksum offload Disabled
Jan 29 10:51:21 firewall kernel: ax0: VLAN filtering Disabled
Jan 29 10:51:21 firewall kernel: ax0: VLAN Stripping Disabled
Jan 29 10:51:21 firewall kernel: ax0: __xgbe_phy_config_aneg: fix conf fail -22
Jan 29 10:51:21 firewall kernel: ax0: __xgbe_phy_config_aneg: set_mode 1 AN int reg value 0x370f000 ret value -22
Jan 29 10:51:21 firewall kernel: ax0: xgbe_phy_start: phy_config_aneg -22
Jan 29 10:51:21 firewall kernel: ax0: axgbe_pci_init: phy start -22
Jan 29 10:51:21 firewall kernel: ax0: SPH Enabled
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 0
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 1
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 2
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 3
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 4
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 5
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 6
Jan 29 10:51:21 firewall kernel: ax0: xgbe_config_sph_mode: SPH enabled in channel 7
Jan 29 10:51:21 firewall kernel: ax0: RSS Enabled
Jan 29 10:51:21 firewall kernel: ax0: Receive checksum offload Disabled
Jan 29 10:51:21 firewall kernel: ax0: VLAN filtering Disabled
Jan 29 10:51:21 firewall kernel: ax0: VLAN Stripping Disabled
Jan 29 10:51:21 firewall kernel: ax0: __xgbe_phy_config_aneg: fix conf fail -22
Jan 29 10:51:21 firewall kernel: ax0: __xgbe_phy_config_aneg: set_mode 1 AN int reg value 0x370f000 ret value -22
Jan 29 10:51:21 firewall kernel: ax0: xgbe_phy_start: phy_config_aneg -22
Jan 29 10:51:21 firewall kernel: ax0: axgbe_pci_init: phy start -22
Jan 29 10:51:32 firewall opnsense[85380]: /usr/local/etc/rc.bootup: The command '/sbin/dhclient -c '/var/etc/dhclient_wan.conf' -p '/var/run/dhclient.ax0_vlan10.pid' 'ax0_vlan10'' returned exit code '1', the output was 'ax0_vlan10: no link .............. giving up'
root@firewall:~ #
Logged
Patrick M. Hausen
Hero Member
Posts: 6735
Karma: 568
Re: Advide for GBIC on DEC3860
«
Reply #1 on:
March 19, 2021, 09:00:36 pm »
I am not quite sure if they are even supposed to be backward compatible. But that port on your new appliance is an SFP+ one. So possibly you will need an SFP+ (read: 10G) module. Which will then negotiated down to 1G speed.
Logged
Deciso DEC750
People who think they know everything are a great annoyance to those of us who do.
(Isaac Asimov)
Mbl
Jr. Member
Posts: 78
Karma: 6
Re: Advide for GBIC on DEC3860
«
Reply #2 on:
March 20, 2021, 02:17:45 am »
Thanks @pmhausen for your replay. The device I had previously (Unif) also had SFP+ ports and the GBIC worked very well.
The "funny" thing is, I do have a (old) ethernet GBIC in the ax1 port which works pretty well too
Anybody a good alternative GBIC which is compatible with the device or a good fix?
Logged
Mbl
Jr. Member
Posts: 78
Karma: 6
Re: Advide for GBIC on DEC3860
«
Reply #3 on:
March 23, 2021, 08:32:04 pm »
Anybody a idea for a 1GB GBIC module being supported with the built in AMD SFP+ slots with the following specification?
FORM FACTOR: SFP
CONNECTOR: LC-Simplex
INTERFACE: Singlemode BiDi
WAVELENGTH TX: 1310 nm
WAVELENGTH RX: 1490 nm
Logged
Patrick M. Hausen
Hero Member
Posts: 6735
Karma: 568
Re: Advide for GBIC on DEC3860
«
Reply #4 on:
March 23, 2021, 08:53:39 pm »
If you bought a DEC3860 from Deciso, why don't you just ring them and ask? Seriously, your first stop for anything hardware related should be your supplier and not a community forum.
Logged
Deciso DEC750
People who think they know everything are a great annoyance to those of us who do.
(Isaac Asimov)
Mbl
Jr. Member
Posts: 78
Karma: 6
Re: Advide for GBIC on DEC3860
«
Reply #5 on:
June 02, 2021, 11:04:00 pm »
Have had great support from Deciso!
With version 21.4.1 I an can confirm that both modules (siligence sga 441sfpo-1gb and SwissGBIC GLC-BX-U-C – both BiDi) are working now.
Logged
franco
Administrator
Hero Member
Posts: 17621
Karma: 1606
Re: Advide for GBIC on DEC3860
«
Reply #6 on:
June 03, 2021, 12:05:51 pm »
Same goes for community 21.1.6
Cheers,
Franco
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
Hardware and Performance
»
Advide for GBIC on DEC3860