Sep 13 05:02:16 kernel: Module pci/igb failed to register: 17Sep 13 05:02:16 kernel: module_register: cannot register pci/igb from kernel; already loaded from if_igb.koSep 13 04:59:38 kernel: Module pci/igb failed to register: 17Sep 13 04:59:38 kernel: module_register: cannot register pci/igb from kernel; already loaded from if_igb.koSep 13 10:23:19 opnsense: /usr/local/etc/rc.bootup: Warning! dhcpd_radvd_configure(auto) found no suitable IPv6 address on igb1Sep 13 10:23:13 opnsense: /usr/local/etc/rc.bootup: Accept router advertisements on interface igb0Sep 13 10:23:13 opnsense: /usr/local/etc/rc.bootup: The command '/sbin/dhclient -c '/var/etc/dhclient_wan.conf' -p '/var/run/dhclient.igb0.pid' 'igb0'' returned exit code '1', the output was 'igb0: no link .............. giving up'Sep 13 10:23:00 kernel: igb1: netmap queues/slots: TX 4/1024, RX 4/1024Sep 13 10:23:00 kernel: igb1: Bound queue 3 to cpu 3Sep 13 10:23:00 kernel: igb1: Bound queue 2 to cpu 2Sep 13 10:23:00 kernel: igb1: Bound queue 1 to cpu 1Sep 13 10:23:00 kernel: igb1: Bound queue 0 to cpu 0Sep 13 10:23:00 kernel: igb1: Ethernet address: <MAC ADDR>Sep 13 10:23:00 kernel: igb1: Using MSIX interrupts with 5 vectorsSep 13 10:23:00 kernel: igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0x92000000-0x9201ffff,0x91400000-0x917fffff,0x92040000-0x92043fff at device 0.1 on pci1Sep 13 10:23:00 kernel: igb0: netmap queues/slots: TX 4/1024, RX 4/1024Sep 13 10:23:00 kernel: igb0: Bound queue 3 to cpu 3Sep 13 10:23:00 kernel: igb0: Bound queue 2 to cpu 2Sep 13 10:23:00 kernel: igb0: Bound queue 1 to cpu 1Sep 13 10:23:00 kernel: igb0: Bound queue 0 to cpu 0Sep 13 10:23:00 kernel: igb0: Ethernet address: <MAC ADDR>Sep 13 10:23:00 kernel: igb0: Using MSIX interrupts with 5 vectorsSep 13 10:23:00 kernel: igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0x92020000-0x9203ffff,0x91c00000-0x91ffffff,0x92044000-0x92047fff at device 0.0 on pci1